torque AUDI A4 1996 B5 / 1.G AWM Engine Lubrication System Components Workshop Manual

17-2


Part I - Oil pump/oil pan components

1 -
28 Nm
2 -
Limit stop for torque reaction support
3 -
Oil pan
Apply silicone sealant D 176 404 A2 before
installing Removing and installing Page 17
-11
4 -
Oil pan
With pressure relief valve (12 bar)Removing and installing Page 17
-28
Before installation check whether the two
dowel sleeves -Pos. 12 - for the
centralizing of the oil pump/cylinder block
are present Replace pump if there is scoring on moving
surfaces and gear teeth Tightening torque for oil pump cover to oil
pump housing: 10 Nm
Pa
ge 2 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-16

Vehicles with automatic transmission:

Note:
Observe cleanliness rules when working on the
automatic transmission:

Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 37


Note:
Ignore positions -1- and -2-.
All models: - Remove bolt -3- and disconnect ATF lines from transmission.
- Remove bracket for ATF lines from engine.
- Move ATF lines aside.

- Remove stop for torque reaction support -arrows-.
Pa
ge 16 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-27

Tightening torques

Component

Nm
Oil pan to cylinder block M7 15

M10 40
Oil pan to transmission 45
Limit stop for torque reaction support on oil
pan
28
Engine mounting to subframe 25
Engine mounting to engine support 25
Transmission support to transmission
support M10 40
Transmission mounting to subframe
M8
25
Oil return pipe to oil pan 10
Oil drain plug 30
Hose clamps for air duct hoses
3.5
Pa
ge 27 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-29

Installing
Installation is carried out in the reverse order of
removal; note the following:

- Insert dowel sleeves -Item 12 -, Page 17
-4 on
top of oil pump.


Oil pump shaft/sprocket wheel location: Can
only be installed in one position.

- Installing oil pan Page 17
-23

Tightening torques

Component

Nm
Chain sprocket to oil pump shaft 22
Oil pump to cylinder block 16
Pa
ge 29 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1