ESP AUDI A4 1996 B5 / 1.G Brakes ESP DTC Table Owner's Guide
[x] Cancel search | Manufacturer: AUDI, Model Year: 1996, Model line: A4, Model: AUDI A4 1996 B5 / 1.GPages: 96, PDF Size: 0.3 MB
Page 31 of 96

01-385
Printed output
from VAG1551
Scan Tool (ST) Possible cause
Corrective action
DTC
01203
Continuation:
ABS / instrument
cluster electrical
connection
No signal
Short circuit to B+ in wire from
instrument cluster
combination processor -J218-
to ABS control module -J104-
Electrical Wiring Diagrams, Troubleshooting & Component
Locations - Check wires between instrument cluster combination processor
-J218- (green connector, terminal 11) and the ABS control
module -J104- (terminal 32).
See continuation
on next page Note: Only replace the control
module as a last resort.
ABS control module -J104-
malfunctioning.
Repair Manual, Heating & Air Conditioning, Repair Group 01
- For vehicles with automatic climate control: if wiring is OK,
check the TIM signal (standing time signal) with the ABS control
module connected and disconnected using the measuring value
blocks for the A/C control module -J301-. If the signal is
recognized by the A/C control module -J301-, replace the ABS
control module -J104-.
Pa
ge 31 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17
Page 32 of 96

01-386
Printed output from
VAG1551 Scan Tool
(ST) Possible cause
Corrective action
DTC
01203
ABS / instrument
cluster electrical
connection
No signal
Continuation:
Note: Only replace the control
module as a last resort.
A/C control module -J301-
malfunctioning. - If the TIM signal is also not recognized by the A/C control
module -J301-, disconnect the A/C control module -J301- and
check the TIM signal by reading the measuring value blocks for
the ABS control module.
- "Read measuring value block" function 08 page 01
-256
- If the signal is recognized by the ABS control module -J104-
now, replace the A/C control module -J301-.
Note: Only replace the control
module as a last resort.
Instrument cluster
combinator processor -
J218- malfunctioning. - If the ABS control module -J104- still does not recognize the
TIM signal, replace the instrument cluster combination
processor -J218-.
Pa
ge 32 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17
Page 33 of 96

01-387
Printed output from
VAG1551 Scan Tool
(ST) Possible cause
Corrective action
DTC
01314
Engine Control Module
(ECM)
Control difference
The Engine Control Module
(ECM) is not able to reduce
engine torque. - Replace the ABS/ESP control module -J104- after
conferring with the product department of your distributor
or with the responsible importer.
01316
Brake control module
Control difference It took longer than 5 seconds for
an ESP adjustment. - Replace the ABS/ESP control module -J104- after
conferring with the product department of your distributor
or with the responsible importer.
Pa
ge 33 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17
Page 34 of 96

01-388
Printed output from
VAG1551 Scan Tool
(ST) Possible cause
Corrective action
DTC
01418
Pilot valve -1- traction
control -N225-
Open circuit, short circuit to B+ or Ground (GND)
in wiring between ABS hydraulic unit -N55- and
ABS control module -J104-.
Pilot valve -1- traction control -N225-
malfunctioning.
Repair Manual, Brake System, Repair
Group 45
- Carry out "electrical test", step 5 page 01
-
318
.
- If the electrical test does not reveal any
malfunctions, check all wiring and connectors
for loose contacts.
- If the suggested steps do not lead to a
localization of the malfunction, replace the
ABS control module (w/EDL) -J104-.
01419
Pilot valve -2- traction
control -N226-
Open circuit, short circuit to B+ or Ground (GND)
in wiring between ABS hydraulic unit -N55- and
ABS control module -J104-.
Pilot valve -2- traction control -N226-
malfunctioning. - Carry out "electrical test", step 5 page 01
-
318
.
- If the electrical test does not reveal any
malfunctions, check all wiring and connectors
for loose contacts.
- If the suggested steps do not lead to a
localization of the malfunction, replace the
ABS control module (w/EDL) -J104-.
Pa
ge 34 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17
Page 35 of 96

Repair Manual, Brake System, Repair
Group 45
Pa
ge 35 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17
Page 36 of 96

01-389
Printed output from
VAG1551 Scan Tool
(ST) Possible cause
Corrective action
DTC
01420
High pressure switch
valve -1- traction
control -N227-
Open circuit, short circuit to B+ or Ground
(GND) in wiring between ABS hydraulic unit -
N55- and ABS control module -J104-.
High pressure switch valve -1- traction control -
N227- malfunctioning.
Repair Manual, Brake System, Repair
Group 45
- Carry out "electrical test", step 6 page
01
-318
.
- If the electrical test does not reveal any
malfunctions, check all wiring and
connectors for loose contacts.
- If the suggested steps do not lead to a
localization of the malfunction, replace the
ABS control module (w/EDL) -J104-.
01421
High pressure switch
valve -2- traction
control -N228-
Open circuit, short circuit to B+ or Ground
(GND) in wiring between ABS hydraulic unit -
N55- and ABS control module -J104-.
High pressure switch valve -2- traction control -
N228- malfunctioning. - Carry out "electrical test", step 6 page
01
-318
.
- If the electrical test does not reveal any
malfunctions, check all wiring and
connectors for loose contacts.
- If the suggested steps do not lead to a
localization of the malfunction, replace the
ABS control module (w/EDL) -J104-.
Pa
ge 36 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17
Page 37 of 96

Repair Manual, Brake System, Repair
Group 45
Pa
ge 37 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17
Page 38 of 96

01-390
DTC table; DTCs from 01422 to 01425
Printed output from
VAG1551 Scan Tool
(ST) Possible cause
Corrective action
DTC
01422
Hydraulic pump for
traction control -V156-
Insufficient voltage supply to hydraulic pump
for traction control -V156-. - Carry out "electrical test", step 25 page
01
-323
.
Short circuit to Ground (GND) in wiring
between hydraulic pump for traction control -
V156- and ABS control module -J104-.
Open circuit in voltage supply to ABS control
module -J104-.
Electrical Wiring Diagrams, Troubleshooting
& Component Locations - Check wiring between hydraulic pump for
traction control -V156- and ABS control
module -J104- for short to Ground (GND).
- Check the voltage supply lines to ABS
control module -J104-.
See continuation on
next page
Fuse malfunctioning.
Electrical Wiring Diagrams, Troubleshooting
& Component Locations - Replace fuse 42.
Pa
ge 38 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17
Page 39 of 96

01-391
Printed output from
VAG1551 Scan Tool
(ST) Possible cause
Corrective action
DTC
01422
Hydraulic pump for
traction control -V156-
Continuation:
Short circuit to Ground (GND) in
hydraulic pump for traction
control -V156-.
Repair Manual, Brake System, Repair Group 45
- If you do not find a problem in wiring between hydraulic
pump for traction control -V156- and ABS control module -
J104-, replace hydraulic pump for traction control -V156-.
See continuation on
next page Note: Only replace the control
module as a last resort.
ABS control module -J104-
malfunctioning
Repair Manual, Brake System, Repair Group 45
- If the malfunction cannot be fixed, replace the ABS
control module -J104-. Pa
ge 39 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17
Page 40 of 96

01-392
Printed output from
VAG1551 Scan Tool
(ST) Possible cause
Corrective action
DTC
01422
Continuation:
Hydraulic pump for
traction control -V156-
Short circuit to B+
Open circuit in wiring between hydraulic
pump for traction control -V156- and ABS
control module -J104-. - Check wiring between hydraulic pump for
traction control -V156- and ABS control module
-J104- for open circuit.
See continuation on
next page Short circuit to B+ in wiring between
hydraulic pump for traction control -V156-
and ABS control module -J104-.
Electrical Wiring Diagrams, Troubleshooting
& Component Locations - Check wiring between hydraulic pump for
traction control -V156- and ABS control module
-J104- for short to B+.
Pa
ge 40 of 96 Electronic Stabilization Pro
gram
(ESP
) DTC table
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.17