sensor AUDI A4 1996 B5 / 1.G Suspension Running Change From Connecting Link Ball Joint 1999 Workshop Manual

40-14


Headlight range adjuster, removing and
installing

Through m.y. 1998 on vehicles with xenon
headlights, a headlight range adjuster may be
installed in the left headlight.
Arrow points in direction of travel.
1 -
Mounting plate
2 -
Level sensor
3 -
Bolts
4 Nm +1/-0 Nm (35 in. lb +9/-0 in. lb)
4 -
Pop rivets (2x steel) 4.8 mm diameter
5 -
Nut 3 Nm +1/-0 Nm (27 in. lb +9/-0 in. lb)
Note, page 40
-16
6 -
Shock absorber
7 -
Connecting link
Pa
ge 4 of 6 Runnin
g chan
ge from connectin
g link with ball
joint to connectin
g link with rubber bushin
g (m.
y. 1999 [micro]
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.2

40-16
When removing and installing the lower track
control link, the clamp must be removed

Note:
Attach the rod for headlight range adjuster to the
level sensor, using a 10 mm open end wrench no
thicker than dimension -A- to prevent damaging
the seal.

When installing the headlight range adjuster, make sure that the arm for
the level sensor and the rod for the headlight range adjuster are correctly
aligned to each other.
Notes:
Dimension -A-: 4 mm (0.157 in.)Nut -1- tightening torque: 3 Nm +1/-0 Nm (27 in. lb +9/-0 in. lb)
- Using pliers, secure rod for headlight range adjuster to lower track
control link between two protrusions Rod for headlight range adjuster must be vertical.Level sensor arm must point downward and forward.
Pa
ge 6 of 6 Runnin
g chan
ge from connectin
g link with ball
joint to connectin
g link with rubber bushin
g (m.
y. 1999 [micro]
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.2