AUDI A4 1997 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install User Guide

AUDI A4 1997 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install User Guide https://www.carmanualsonline.info/img/6/1249/w960_1249-0.png AUDI A4 1997 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install User Guide

Page 11 of 13

AUDI A4 1997 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install User Guide 39-143
 
    
Fig. 9  Installing small tapered roller bearing outer race
-  Oil outer race, and position using VW408A punch and 30-205 thrust 
pad. 
    
WARNING! 
Wear protective gloves.  Fig. 10  In

Page 12 of 13

AUDI A4 1997 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install User Guide 39-144
 
    
Note:  
If the specified friction torque is exceeded, the spacer sleeve must be 
replaced and the adjustment repeated. A spacer sleeve that has been 
over-compressed at any time cannot b

Page 13 of 13

AUDI A4 1997 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install User Guide 39-145
 
    
1) Must have run at least 50 km (30 miles)   Fig. 12  Measuring friction torque
A - Torque gauge, 0-600 Ncm (53 in. lb) (commercially available)
B - Socket attachment, 32 mm
-  Following
Page:   < prev 1-10 11-20