sensor AUDI A4 1997 B5 / 1.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual

38-2

Removed parts, overview


Notes:

There is a distinction made between two types
of transmission. Transmissions with hydraulic
control E17, the sensor for transmission RPM
(inductive sensor) is secured to bottom of valve
body. Transmissions with hydraulic control
E18/2, the sensor for transmission RPM (hall
effect sensor) is secured to transmission
housing behind valve body.
Information regarding which transmission is
installed can be found in tables Page 00
-4
onward.

Overview of the removed parts for
transmission with Park/Neutral Position
(PNP) Switch -E17- page 38
-3

Overview of the removed parts for
transmission with hydraulic control E18/2
page 38
-11

Pa
ge 2 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-5


10 -
Bracket
For wiring harnessHook in wiring harnessMounted with valve body bolts
11 -
Bolt - 6 Nm
12 -
Transmission Vehicle Speed Sensor (VSS)
-G38- Removing and installing page 38
-40
13 -
Spacer sleeve
Height: 8 mm
14 -
Inner oil line Always replaceRemoving and installing page 38
-29
15 -
O-ring
Always replace
Pa
ge 5 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-6


16 -
Speedometer Vehicle Speed Sensor (VSS)
-G22-
Removing and installing page 38
-35
17 -
O-ring
Always replaceCoat with Vaseline
18 -
Multi-Function Transmission Range (TR)
Switch -F125- Removing and installing page 38
-33
Replacing shift rod sealing ring page 38
-
31

19 -
Bolt - 8 Nm
20 -
O-ring
Always replace
21 -
Locking clamp
Pa
ge 6 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-7


22 -
Wiring harness
Always replace page 38
-42
Transmission Fluid Temperature Sensor -
G93- is integrated into the wiring harness Remove and install valve body to install
page 38
-22

Unhook from bracket for wiring harness,
item 10 Installation position wiring harness
connector: Flat part of rear collar points
toward oil pan, the tabs at collar are
horizontal
23 -
Bolt - 6 Nm
24 -
Sensor for transmission RPM -G182- Removing and installing page 38
-36
Pa
ge 7 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-13


11 -
Bolt - 6 Nm
12 -
Transmission Vehicle Speed Sensor (VSS)
-G38-
Removing and installing page 38
-40
13 -
Spacer sleeve
Height: 8 mm
14 -
Inner oil line Always replaceRemoving and installing page 38
-29
15 -
O-ring
Always replace
16 -
Speedometer Vehicle Speed Sensor (VSS)
-G22- Removing and installing page 38
-35
Pa
ge 13 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-15


22 -
Wiring harness in transmission
Always replace page 38
-42
Transmission Fluid Temperature Sensor -
G93- is integrated into the wiring harness Remove and install valve body to replace
page 38
-22

Unhook from bracket for wiring harness,
item 10 Installation position wiring harness
connector: Flat part of rear collar points
toward oil pan, the tabs at collar are
horizontal
23 -
Bolt - 9 Nm
24 -
Sensor for transmission RPM -G182- Removing and installing page 38
-36
Pa
ge 15 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-23

Only for Park/Neutral Position (PNP) Switch -
E17-

- Disconnect harness connector from Transmission Vehicle Speed
Sensor (VSS) -G38- (arrow).

Notes: - Loosen mounting bolts (arrows) of valve body and remove valve body
with wiring harness.
Only the marked mounting bolts (arrows) must be loosened.When loosening other bolts, the function of the valve body can be
influenced or the valve body splits up. The bolt (arrow) A is shorter and thinner than the other bolts. Observe
allocation.
Pa
ge 23 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-24

Only for transmission with hydraulic control
E18/2

- Disconnect harness connector from Transmission Vehicle Speed
Sensor (VSS) -G38- (-A-).
- Disconnect harness connector from Sensor for transmission RPM -
G182- (-B-).

Notes: - Loosen mounting bolts (arrows) of valve body and remove valve body
with wiring harness.
Only the marked mounting bolts (arrows) must be loosened.When loosening other bolts, the function of the valve body can be
influenced or the valve body splits up. The bolt (arrow A) is not installed on transmissions with hydraulic
control E18/2 and can therefore be disregarded.
Pa
ge 24 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-25

All:

- Remove valve body from transmission while
advancing the wiring harness connector.

Note only for Park/Neutral Position (PNP)
Switch -E17-:
Do not place the removed valve body on the
Sensor for transmission RPM at rear of valve
body. Danger of damage.

Installing

- Lightly coat O-rings of wiring harness connector
with ATF.

- Insert wiring harness connector into
transmission housing.


Installation position: Flat part of rear collar
points downward, the tabs at collar are
horizontal

Only for transmission with hydraulic control
E18/2

- Route wire with connector -C- according to illustration, so that the wire
is not pinched when installing the valve body.
Pa
ge 25 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-27

Only for transmission with hydraulic control
E18/2

Only for Park/Neutral Position (PNP) Switch -E17- - Pull wiring with connector -B- of Sensor for transmission RPM -G182-
between valve body and wiring harness upward.
- Connect connector -B- to connector -A- at wiring harness.
- Connect connector -C- to Transmission Vehicle Speed Sensor (VSS) -
G38-.

- Connect connector (arrow) to Transmission Vehicle Speed Sensor
(VSS) -G38-.
Pa
ge 27 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1