lock AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 1997, Model line: A4, Model: AUDI A4 1997 B5 / 1.G
Pages: 40, PDF Size: 0.77 MB
AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual A4 1997 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/987/w960_987-0.png AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual
Search: (sat nav, headlight aiming, spare tire location, tire type, coolant level, maintenance schedule)

Page 4 of 40

AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual 19-3 7 - O-ring Replace if damaged 8 - Coolant Fan Control (FC) thermal switch - F18- 35 Nm (26 ft lb)For electric coolant fan Switching temperatures, stage 1:On: 92-97 C (198-207 F)Off: 84-

Page 11 of 40

AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual 19-9 Coolant hose connection diagram 1 - Lower coolant hose From radiator to engine 2 - Cylinder head/cylinder block 3 - Intake manifold 4 - Coolant line From heat exchanger to engine bl

Page 13 of 40

AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual 19-11 Cooling system, draining and refilling Draining WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves a

Page 24 of 40

AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual 19-20 Coolant pump, removing and installing Notes: Always replace seals and gaskets. Cover the toothed belt with a cloth to protect it from coolant before removing the coo

Page 27 of 40

AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual 19-22 Installing Installation is the reverse of removal, noting the following: - Remove any remaining sealant from sealing surfaces of coolant pump and cylinder block.

Page 28 of 40

AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual 19-23 Thermostat, removing and installing Notes: Always replace seals and gaskets. Cover the toothed belt with a cloth to protect it from coolant before removing thermosta

Page 30 of 40

AUDI A4 1997 B5 / 1.G AHA ATQ Engines Cooling System Components Workshop Manual 19-24 Installing Installation is the reverse of removal, noting the following: Bleeder valve for thermostat (arrow) must be at the top. - Install thermostat -4- into engine bl
Search: (suspension, spark plugs replace, manual radio set, audio, navigation system, headrest)