AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual A4 1997 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/962/w960_962-0.png AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual
Trending: length, belt, width, checking oil, check oil

Page 11 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-24
      
B - Flywheel end  
     
Note:  
     Replace oil seal together with sealing flange. 
     
Vehicles with manual transmission  
     
- Drain off coolant   Page 19
-19
 .
     
- Remove t

Page 12 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-25
      
Installing  
     
- Install sealing flange.
     
-  Install dual-mass flywheel with new bolts. 
     
Note:  
     Always replace securing bolts for dual-mass 
flywheel.  
     
- Insta

Page 13 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-26
      
Vehicles with automatic transmission  
     
- Remove transmission. 
     
       Repair Manual, 5 Spd. Automatic 
Transmission 01V, Repair Group 37
   
     
- Drain off coolant   Page 1

Page 14 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-27
 
    
Installing   -  Screw clamping bolt 3242 for crankshaft into sealing plug hole and 
tighten. 
-  Mark positions of holes in drive plate, shim -1- and washer -2- in 
relation to crankshaft

Page 15 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-28
      
Tightening torques  
  
Drive plate to crankshaft  
60 Nm + 90   
     
Note:  
     Always replace securing bolts for drive plate.  
    
Note:  
Before installing the transmission, chec

Page 16 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-29
      
Dual-mass flywheel / drive plate, 
installation dimensions, removing and 
installing
 
     
A - Flywheel  
     
Removing 
     
- Remove transmission. 
     
       Repair Manual, 6 Spd

Page 17 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-30
      
Note:  
     The needle bearing is located in the flywheel and 
must be pressed in if a new flywheel is installed 
 Page 13
-35
 . 
     
Installing  
     
-  Install dual-mass flywheel.

Page 18 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-31
      
Tightening torques  
  
Dual-mass flywheel to 
crankshaft  60 Nm + 180
  Clutch to dual-mass flywheel   20 Nm  
     
B - Drive plate  
     
Removing 
     
- Remove transmission.

Page 19 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-32
      
-  TDC drilling in crankshaft must be visible (or 
able to be felt) in line with sealing plug hole. 
     
CAUTION! 
     
Injury risk - do not turn engine while feeling 
for TDC drilling

Page 20 of 26

AUDI A4 1997 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual 13-33
      
Installing  
    
Note:  -  Install drive plate with washer -2- and shim -1- (3.0 mm or 4.0 mm).
Short engines and exchange engines are supplied without bush in 
crankshaft. On vehicles w
Page:   < prev 1-10 11-20 21-30 next >
Trending: belt, check oil, width, checking oil, length