oil pressure AUDI A4 1997 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual

13-53

- Before applying oil seal extractor, thread central
bolt for toothed belt sprocket into crankshaft as
far as it will go.

- Remove inner section of oil seal extractor 3203
one turn out of outer section and lock with
knurled screw.

- Lubricate threaded head of oil seal extractor, place it in position and
exerting firm pressure, screw it into oil seal as far as possible.
- Loosen knurled screw and turn inner part against crankshaft until the
oil seal is pulled out.
- Clamp flats of oil seal extractor in vice. Remove oil seal with pliers.
- Clean contact surface and sealing surface.
Pa
ge 7 of 20 Sealin
g flan
ges and fl
ywheel/drive
plate, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.2

13-54

Installing

Note:
Do not lubricate sealing lip or outer
circumference of seal before pressing in.

- Place guide sleeve T10053/1 onto crankshaft journal.
- Slide oil seal over guide sleeve.

- Press sealing ring flush with central bolt of toothed belt sprocket and
pressure sleeve from T10053.
Pa
ge 8 of 20 Sealin
g flan
ges and fl
ywheel/drive
plate, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.2