AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual A4 1997 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1122/w960_1122-0.png AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual

Page 1 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual 46-46
 
     
Brake pedal, removing and 
installing  
      Removing and installing vacuum servo unit with 
brake master cylinder   page 47
-34
   
    
CAUTION! 
Before disconnecting the hydraulic li

Page 2 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual 46-47
 
    
CAUTION!  -  Secure steering column with safety wire before removing steering 
column from steering gear pinion. 
The splines between the top and bottom part of the steering 
column must

Page 3 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual 46-48
 
    
Note:  
Do not damage control module -1- for immobilizer (where applicable) 
when removing pedal assembly.  -  Remove brake light switch -3- and CCS vent valves -2-.
-  Remove hex socket-

Page 4 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual 46-49
      
Installing  
     
CAUTION! 
     
Do not remove safety wire or other 
removal/installation aids from steering 
column until after the universal joint has been 
re-installed on the steeri

Page 5 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual page 46
-54
 ). 
Pa
ge 5 of 10 Brake 
pedal, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.7

Page 6 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual 46-50
      
Brake light switch -F-, adjusting
 
     
The pedal assembly must be bolted tight to 
the brake servo and to the instrument panel 
member before carrying out the adjustment. 
      The fo

Page 7 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual 46-51
 
    
-  Pull brake light switch out of pedal bracket.
- Remove clip   page 46
-45
 , item - 20 -.
-  Turn nut -2- on brake light switch.
-  Install brake light switch in pedal bracket, insert

Page 8 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual 46-52
 
    
Pedal bracket with internal thread for brake light switch 
Note:  
Between the nut and the pedal bracket there is a spring clip (not shown), 
Part No. N 012 042 4. 
CAUTION! 
Part numbers

Page 9 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual 46-53
 
    
With spring clip for the brake light switch  
Note:  
The switch must be installed only once in order to assure that it is 
adequately tight. 
Adjusting switch 
Note:  1 - Stop surface of

Page 10 of 10

AUDI A4 1997 B5 / 1.G Brake Pedal Remove And Install Workshop Manual 46-54
      
Cruise Control System (CCS) vent valve, 
adjusting
 
     
-  Insert vent valve into clip and push through to 
stop. 
     
-  Push back valve by pulling back brake pedal or 
clutch pedal