fuel tank removal AUDI A4 1997 B5 / 1.G Quattro Fuel Syst
[x] Cancel search | Manufacturer: AUDI, Model Year: 1997, Model line: A4, Model: AUDI A4 1997 B5 / 1.GPages: 55, PDF Size: 0.88 MB
Page 22 of 55
20-73
Note:
Ensure that the bleed line stays clipped to the fuel tank during fuel tank
removal. - Disconnect clamp bands and carrier plate -arrows-.
- Lower fuel tank.
Pa
ge 22 of 55 Fuel su
pp
ly system, servicin
g (vehicles with all wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.3
Page 45 of 55
20-96
Installing
Installation is performed in the reverse of
removal, when installing, note the following:
CAUTION!
Always refer to the latest parts catalog to
ensure that you use original equipment fuel
hose clamps.
- Install surge housing inner section, supply hose
and cover flange in the fuel tank.
Note:
For clarity, the surge housing outer and inner sections are shown in the
illustration without the fuel tank. - Place inner section of surge housing into outer section of surge
housing in tank such that notch -1- on inner section of surge housing
matches mark -2- on outer section of surge housing.
The inner section of the surge housing can be audibly pressed
downward.
- Attach 3307 pump wrench and turn surge housing inner section to the
right approx. 15 (up to the stop). Notch -1- will then be in front of mark -3- (bayonet closure)
Pa
ge 45 of 55 Fuel su
pp
ly system, servicin
g (vehicles with all wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.3