battery AUDI A4 1997 B5 / 1.G Seatbelts Workshop Manual

both ends of cable, pull cable housing apart until
ends of cable are at least 30 cm apart.
Vehicle must not be occupied

- Open windows and close doors.

- Using wiring harness and an external battery
(located outside vehicle), activate gas generator
(maintain minimum 10 m distance).
Pa
ge 7 of 41 Seat belts
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1

69-9


Note:
Arrow -B- indicates direction of travel. 9 -
Belt tensioner
Removing three-point seat belt:
- Disconnect battery.
- Removing sill molding page 70
-80
.
- Remove bolt -9- (1x).
- Remove upper B-pillar trim page 70
-
75
.
- Remove belt webbing from upper B-pillar
trim.
- Remove lower B-pillar trim page 70
-
75
.
- Remove shouldered nuts -3-.
- Disconnect harness connector -C- at belt
tensioner.
- Remove bolt -7-.
- Remove belt tensioner -9- upward out of
anti-twist stop -11-.
Installing three-point seat belt:
- Install belt tensioner -9- with anti-twist
stop -11- as shown in magnified area.
Pa
ge 12 of 41 Seat belts11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1