height AUDI A4 1998 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual

35-7


CAUTION!
Part numbers are listed here for reference only. Always check with
your Parts department for the latest information.
In order to avoid damage due to improper assembly, check the
following after replacing input shaft: Fig. 3 Allocation of input shaft/needle bearingInput shaft diameter

a: 27 mm (1.062 in.) 012 311 123 D
a: 29 mm (1.141 in) 012 311 123 Input shaft must be able to be guided in.Input shaft must have no play.

Dimension -a- from lower edge of straight-edge to upper edge of needle
bearing: 39.5 mm (1.555 in.)
Note:
Measure the dimension from the top edge of the straight-edge and
subtract the height of the straight-edge from the measured dimension. Fig. 4 Allocation of needle bearing
Pa
ge 8 of 17
11/19/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triJBHHO.htm