ECU AUDI A4 1998 B5 / 1.G 01W Transmission Clutch Release Workshop Manual

30-18


5 -
Spring washer
Small diameter facing guide sleeve
(convex side)
6 -
Input shaft seal Use VW681 extractor lever to remove from
guide sleeve Use VW192 arbor to drive in to stop
7 -
Torx bolt Always replace35 Nm (26 ft lb)Self-locking
8 -
Throwout bearing Do not rinse out bearing, wipe clean onlyReplace noisy bearings
9 -
Clutch release lever Before installing, coat contact surface of
clutch slave cylinder plunger with layer of
copper grease, e.g. Z 381 351 TE
10 -
Retaining spring Secure to clutch release lever
Pa
ge 3 of 13 Clutch release mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.30.2