AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1280/w960_1280-0.png AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual

Page 1 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-1
 
     
Shift linkage, servicing 
     
Notes:  
     
Lubricate bearing areas and slide surfaces with 
Polyuric grease G 052 142 A2. 
     Adjusting shift linkage   Page 34
-12
 .
     
To remov

Page 2 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-2
 
  
1 - 
Shift knob 
2 - 
Bushing 
3 - 
Housing cover 
Carefully pry out latch in rear section of 
center console 
4 - 
Top part of retaining frame 
5 - 
Bottom part of retaining frame 
6 - 
Bus

Page 3 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-3
 
  
12 - 
Compression spring 
13 - 
Bushing 
Rounded side faces shift lever
14 - 
Shift lever Can be installed into ball housing in one 
position only 
15 - 
Spacer tube 
16 - 
Nut 8 Nm (71 in.

Page 4 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-4
 
  
23 - 
Circlip 
Always replaceRemove before removing ball stopRounded side faces ball housing (item - 25 
-) 
24 - 
Buffer 
25 - 
Ball housing Buffers for ball stop on left and right must 
be

Page 5 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-5
 
  
33 - 
Nut 
Always replace10 Nm (7 ft lb)Self locking
34 - 
Shift fork 
35 - 
Bolt 23 Nm (17 ft lb)
36 - 
Clamp 
37 - 
Shift rod With shift coupling
38 - 
Bolt Always replace23 Nm (17 ft lb)S

Page 6 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-6
 
  
40 - 
Bolt 
40 Nm (30 ft lb)
41 - 
Nut 40 Nm (30 ft lb)
42 - 
Bolt 
43 - 
Mounting bracket for pivot rod Revised after 06.96   Fig. 1Mounting bracket shown used  05.96 Pivot rod, fastening 0

Page 7 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-7
 
    
As of 06.96 the pivot rod is bolted directly to the transmission cover. The 
additional mounting bracket (   Page 34
-6 , item -43-) and its bolts are 
deleted. For this reason the transmi

Page 8 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-8
      
Shift mechanism, removing and 
installing
 
     
Removing  
     
-  Remove shift knob and housing cover.
     
-  Remove center console   Repair Manual, Body 
Interior, Repair Group 70.

Page 9 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-9
      
-  Separate exhaust system behind Three Way 
Catalytic Converter (TWC); if necessary remove 
front exhaust system together with Three Way 
Catalytic Converter (TWC). 
     
       Repair M

Page 10 of 17

AUDI A4 1998 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual 34-10
      
Installing  
      Install in reverse order of removal, noting the 
following:  
     
-  Push shift rod on so that securing bolt fits into 
recess of shift rod. 
    
 Repair Manual, Eng
Page:   1-10 11-20 next >