check oil AUDI A4 1998 B5 / 1.G APB Engine Cylinder Block Crankshaft And Flywheel Assembly Manual

13-15


3 -
Dual-mass flywheel
Removing and installing Page 13
-29
Removing and installing needle bearing
Page 13
-35

4 -
Crankshaft bearing
Checking axial and radial clearance
Page 13
-21

5 -
Bolt, tightening torque 10 Nm
6 -
Oil spray jet
For piston cooling
7 -
Oil seal for rear sealing flange Replacing Page 13
-23
Pa
ge 2 of 26 C
ylinder block, crankshaft and fl
ywheel, disassembl
y and assembl
y
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.13.2

13-17


14 -
Collar bolt, tightening torque 30 Nm
Apply Loctite when installing
15 -
Bolt, tightening torque 10 Nm
16 -
Front sealing flange
17 -
Expansion pins
18 -
Crankshaft
Checking Page 13
-21
19 -
Chain sprocket for oil pump
Removing and installing Page 17
-62
.
20 -
Pistons
Checking Page 13
-36
Pa
ge 4 of 26 C
ylinder block, crankshaft and fl
ywheel, disassembl
y and assembl
y
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.13.2

13-19


26 -
Connecting rod bearing bolts
Always replaceTightening torque: 30 Nm + 90 (
1/4turn)
When measuring radial clearance, tighten
to 20 Nm but do not turn further.
27 -
Main bearing cap Marking -1- on oil pump sideReplace bolts for main bearing capsWatch position of dowel sleevesChecking bearing clearance Page 13
-21
28 -
Bolts for main bearing caps
Always replaceTightening torque Page 13
-20
Tightening sequence Page 13
-20Pa
ge 6 of 26 C
ylinder block, crankshaft and fl
ywheel, disassembl
y and assembl
y
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.13.2