manual transmission AUDI A4 1998 B5 / 1.G APB Engine Motronic Multiport Fuel Injection System Servising Workshop Manual

24-15


Intake manifold, removing and installing

Note:
The procedure is described for vehicles with
manual transmission. On vehicles with automatic
transmission remove also the secondary air
injection pump.
- Remove air distributor Page 24
-43
.
1 -
Unclip Wastegate Bypass Regulator Valve
-N75 from fuel rail.
Pa
ge 17 of 90 Motronic Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.1

24-26

Important Note:
After installing new engine control module, carry
out the following operations:
- Check DTC memory and erase if necessary
Page 01
-15
.
- Perform adaptation of Throttle Valve Control
Module -J338 Page 24
-146
.
- Observe notes for coding new engine control
module Page 01
-93
.
- On vehicles with cruise control (recognizable at
steering column switch), activate cruise control
function in the engine control module.

Repair Manual, Electrical Equipment, Repair
Group 01

- On vehicles with automatic transmission carry
out adaptation for Kick-Down switch Page 24
-
166
.
- Generate readiness code Page 01
-105
.
- Perform adaptation of immobilizer to engine
control module

Pa
ge 29 of 90 Motronic Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.1

24-43

Fuel injection volume, fuel injector
leakage and spray pattern of injectors,
checking


WARNING!

Fire hazard! The fuel system is pressurized.
Before loosening hose connections or
opening the test connection (to measure fuel
pressure), place a cloth around the
connection. Then release pressure by
carefully pulling off the hose or cap.

Test conditions

Fuel pressure OK; testing Page 24
-33
.
To reach the fuel rail, the following steps must be
performed on vehicles with manual transmission
(without secondary air injection). On vehicles
with automatic transmission (with secondary air
injection) are minor differences in the work
procedure.

Several hoses must now be disconnected: - Unscrew bolts on air duct at points indicated (arrows) and remove air
duct.
- Absolute cleanliness must be maintained.
Pa
ge 51 of 90 Motronic Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.1