AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/972/w960_972-0.png AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual
Trending: dimensions, tire type

Page 1 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual 13-6
 
  
Cylinder block, crankshaft and 
flywheel, component layout Note:  
Always replace gaskets and seals. 
1 - 
Main bearing cap bolts 
Always replaceTightening torque: 60 Nm (44 ft lb) plus 
1/2

Page 2 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual Checking connecting rods and bearings   
page 13
-31
 
Pa
ge 2 of 32 C
ylinder block, crankshaft and fl
ywheel, com
ponent la
yout
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t

Page 3 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual 13-7
 
  
5 - 
Piston rings 
Checking  page 13
-25
6 - 
Piston 
Checking  page 13
-26
7 - 
Crankshaft 
Checking  page 13
-21
Dimensions  page 13
-24
8 - 
Oil pump 
Check drive gear on crankshaft when

Page 4 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual   Manual trans. (flywheel)
Always replaceTightening torque: 40 Nm (30 ft lb) plus 
1/2-turn (180 ) 
Pa
ge 4 of 32 C
ylinder block, crankshaft and fl
ywheel, com
ponent la
yout
11/21/2002 htt
p://127.0

Page 5 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual 13-8
 
  
12 - 
Dual mass flywheel or drive plate 
Removing and installing, installation 
dimensions  page 13
-17
 
Removing and installing pilot needle 
bearing  page 13
-16
 
Adjusting engine speed

Page 6 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual 13-9
      
Ribbed belt, removing and installing
 
     
CAUTION! 
     
Mark the direction of belt travel before 
removing, using a crayon or marker. 
Reinstalling a used belt in the opposite 
direct

Page 7 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual D1 - Without air conditioner
D2 - With air conditioner
Pa
ge 7 of 32 C
ylinder block, crankshaft and fl
ywheel, com
ponent la
yout
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t

Page 8 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual 13-10
      
Vibration damper, removing and 
installing
 
     
Removing  
      Removing ribbed belt   page 13
-9 .  
     
Note:  
     The center bolt does not have to be loosened to 
remove the vi

Page 9 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual 13-11
      
Toothed belt, removing and installing
 
     
Removing  
     
CAUTION! 
     
Mark the direction of belt travel before 
removing, using a crayon or marker. 
Reinstalling a used belt in t

Page 10 of 32

AUDI A4 1998 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual 13-12
      
-  Remove left and right toothed-belt guards.
     
-  Remove vibration damper   page 13
-10
 .
     
-  Remove lower toothed-belt guard.
     
-  Loosen toothed-belt tensioning pulley, a
Page:   1-10 11-20 21-30 31-40 40 next >
Trending: dimensions, tire type