lock AUDI A4 1998 B5 / 1.G Brakes ESP Bosch 5.3 Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1998, Model line: A4, Model: AUDI A4 1998 B5 / 1.GPages: 27, PDF Size: 0.21 MB
Page 11 of 27

01-225
"Brake
malfunction"
symbol ABS/EDL
warning
light
-K47- Traction
control
indicator light
-K86- Possible reasons why the indicator lamps light up
off off off
There is an irregularity. The indicator lamps go on during the self-
test and then go out. The possible causes are as follows: The voltage supply for the ABS control module -J104- is between
7 and 10 volts and the vehicle speed is < 6 km/h. Carry out
"Electrical test", step 21. The DTC "01119 gear recognition signal" is stored in the DTC
memory. Check DTC memory page 01
-356
.
The signal indicating whether the parking brake is set or released
is not being sent to the ABS control module -J104-. "Read
measuring value block" function 08 page 01
-256
, display group
2 page 01
-261
.
Check the brake light switch -F-. "Read measuring value block"
function 08 page 01
-256
, display group 2 page 01
-261
.
Check the zero position of the steering angle sensor -G85-. "Read
measuring value block" function 08 page 01
-256
, display group
5 page 01
-270
.
Pa
ge 11 of 27 Electronic Stabilization Pro
gram
(ESP
) Bosch 5.3
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.14
Page 14 of 27

01-228
"Brake
malfunction"
symbol ABS/EDL
warning
light
-K47- Traction
control
indicator
light
-K86- Possible reasons why the indicator lamps light up
on on on The ABS and traction control indicator lights go on, and three seconds after
the ignition is switched on the red "brake system malfunction" symbol goes
on.
WARNING!
The brake system is only partially functional. Because brake pressure at
the rear wheels is no longer regulated vie Electronic Brake Distribution
(EBD), the rear wheels can lock even during light braking (excessive
braking at rear axle). This can cause the rear of the vehicle to break
loose and thereby cause and accident.
Note: For vehicles with automatic transmission, the red "brake system
malfunction" symbol does not appear immediately after the ignition is
switched on. Instead, the note "Depress brake pedal before engaging gear"
appears in the display. Press the brake pedal and select a gear. The red
brake warning light appears, if the light control is working properly.
A malfunction deactivated the ABS/EDL, ASR/ESP and the "Electronic
Brake Distribution" (EBD).Check DTC memory page 01
-356
. Pa
ge 14 of 27 Electronic Stabilization Pro
gram
(ESP
) Bosch 5.3
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.14