AUDI A4 1998 B5 / 1.G Front End User Guide

AUDI A4 1998 B5 / 1.G Front End User Guide A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/885/w960_885-0.png AUDI A4 1998 B5 / 1.G Front End User Guide

Page 11 of 19

AUDI A4 1998 B5 / 1.G Front End User Guide 50-11
 
  
7 - 
Combination bolt 
7.5 Nm (66 in. lb)
8 - 
Bracket 
9 - 
Combination bolt 7.5 Nm (66 in. lb)
10 - 
Metal nut 
11 - 
Combination bolt 7.5 Nm (66 in. lb)
Pa
ge 11 of 19 Bod
y, front
11/20

Page 12 of 19

AUDI A4 1998 B5 / 1.G Front End User Guide 50-12
 
    
Fig. 1  Removing and installing end plate
-  Remove front wheel. 
-  Remove wheelhousing liner   page 66
-31
 .
- Remove bolt -2- (2x). 
   Tightening torque: 2.5 Nm (22 in. lb)
-  Remove

Page 13 of 19

AUDI A4 1998 B5 / 1.G Front End User Guide 50-13
 
  
Front fender (VIN 8D XA 200 001   and 
S4), assembly overview
 
1 - 
Combination bolt 
4.5 Nm
2 - 
Threaded rivet The threaded rivet is inserted with VAG 
1618 A. 
3 - 
Combination bolts (2

Page 14 of 19

AUDI A4 1998 B5 / 1.G Front End User Guide 50-14
 
  
 Repair Manual, Electrical Equipment, Repair 
Group 94, headlights, headlights, removing and installing.
    6 - 
Snap-on nut Only installed for S4.
7 - 
Fender Drill additional hole at bot

Page 15 of 19

AUDI A4 1998 B5 / 1.G Front End User Guide 50-15
 
  
8 - 
Metal bolt 
7.5 Nm
9 - 
Metal bolt 7.5 Nm
10 - 
Bracket 
11 - 
Metal bolt 7.5 Nm
12 - 
Metal bolt 7.5 Nm
13 - 
Bracket 
14 - 
Combination bolt 10 Nm
15 - 
Combination bolt 7.5 Nm
Pa
ge

Page 16 of 19

AUDI A4 1998 B5 / 1.G Front End User Guide 50-16
 
    
Fig. 1  Removing and installing end plate
-  Remove front wheel. 
-  Remove wheelhousing liner   page 66
-31
 .
- Remove bolt -2- (2x). 
   Tightening torque: 2.5 Nm 
-  Remove end plate

Page 17 of 19

AUDI A4 1998 B5 / 1.G Front End User Guide 50-17
 
    
Note:  
For part replacement, drill hole before painting.  Fig. 2  Drilling hole for S4 fender
-  Drill 7 mm diameter hole in fender. Dimension -a- = 22mm and -b- = 
8mm. 
-  Restore corr

Page 18 of 19

AUDI A4 1998 B5 / 1.G Front End User Guide 50-18
 
  
Noise insulation panel, assembly overview
 
1 - 
Quick-release screw 
Remove only this quick release screw for 
service position Three pieces2 Nm (18 in. lb)
2 - 
Front noise insulation 
3

Page 19 of 19

AUDI A4 1998 B5 / 1.G Front End User Guide 50-19
 
  
6 - 
Mounting for noise insulation panel 
Position -9- must face left side of vehicle
7 - 
Bolt Two pieces7.5 Nm (66 in. lb)
8 - 
Plate nut Two pieces
9 - 
Plate nut Three pieces
10 - 
Clam
Page:   < prev 1-10 11-20