ECU AUDI A4 1998 B5 / 1.G Hood Workshop Manual

55-2


2 -
Gas-filled strut
Removing page 55
-4
- To install, press gas-filled strut onto ball
stud.
- Install with tube end of strut at body of
vehicle.
Releasing pressure page 55
-5
3 -
Hood hinge
Hood -1- must be removed or propped up
securely
- To remove, remove bolts -5-, -6- and -7-.
4 -
Stop buffer Adjusting Fig. 2
Page 55
-6
5 -
Bolts (2x)
21 Nm (15 ft lb)
6 -
Bolts (2x) 21 Nm (15 ft lb)
Pa
ge 2 of 11 Hoo
d
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.55.1

55-4


Gas-filled strut, removing and installing

1 -
Gas-filled strut
Removing:
- Prop up or secure hood -2- in open
position.
- Remove securing clip -5-.
- Also remove clip -3-.
- Lift hood slightly, remove bolt -4- and
remove gas-filled strut.
Installing:
- Install with tube end of strut at body of
vehicle.
2 -
Hood
3 -
Securing clip
4 -
Pins
5 -
Securing clip
6 -
Stop buffer
Hood height adjustment Fig. 2
Pa
ge 4 of 11 Hoo
d
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.55.1