AUDI A4 1998 B5 / 1.G Hood Workshop Manual

AUDI A4 1998 B5 / 1.G Hood Workshop Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/888/w960_888-0.png AUDI A4 1998 B5 / 1.G Hood Workshop Manual

Page 1 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-1
 
  
Hood Hood, removing, installing and adjusting
 
1 - 
Hood 
  Removing:
 - Disconnect hose to windshield washer 
system and unclip. 
Second person is needed to support and 
lift hood during r

Page 2 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-2
 
  
2 - 
Gas-filled strut 
Removing  page 55
-4
 - To install, press gas-filled strut onto ball 
stud. 
 - Install with tube end of strut at body of 
vehicle. 
Releasing pressure   page 55
-5
3

Page 3 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-3
 
  
7 - 
Bolt 
7.5 Nm (66 in. lb)
8 - 
Hood lock release 
  - To remove, remove bolt -9-.Installing  Fig. 3
  Page 55
-6
Hood lock release can only be adjusted in 
direction of travel 
9 - 
Bolt

Page 4 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-4
 
  
Gas-filled strut, removing and installing
 
1 - 
Gas-filled strut 
  Removing:
 - Prop up or secure hood -2- in open 
position. 
  - Remove securing clip -5-.
  - Also remove clip -3-.
 - Li

Page 5 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-5
 
    
WARNING! 
Clamp only in the area shown; otherwise there is a risk of an 
accident! 
Note:  
Always wear eye protection when performing this procedure. Cover the 
sawing area with a clean r

Page 6 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-6
 
    
Note:  
The stop buffers can be used for adjusting the height of the hood.  Fig. 2  Adjusting height of stop buffers
-  When hood is closed, stop buffer -3- (2x external) must rest lightly

Page 7 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-7
 
    
Fig. 4  Removing and installing lower section of hood lock
-  Disengage hood lock cable   page 55
-10
 .
- Remove bolts -2- (4x). 
   Tightening torque: 10 Nm (7 ft lb)
-  Remove lower sec

Page 8 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-8
      
Hood lining, removing
 
    
-  Remove clips -1- (17x).
-  Remove lining -2-.
Pa
ge 8 of 11 Hoo
d
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI

Page 9 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-9
      
Radiator grill, removing and installing
 
    
Mounting point -A- centers radiator grill in hood.  
-  Place radiator grill -1- in guide notch -3- and clip into hood -2- in 
direction show

Page 10 of 11

AUDI A4 1998 B5 / 1.G Hood Workshop Manual 55-10
 
  
Hood lock cable, removing and installing
 
 Repair Manual, Body
-Interior, Repair Group 68
    1 - 
Grommet 
2 - 
Hood lock cable 
  Removing:
 - Remove storage compartment on drivers 
sid
Page:   1-10 11-20 next >