battery AUDI A4 1998 B5 / 1.G Ignition Switch Lock Cylinder Workshop Manual

94-41


Ignition switch lock cylinder,
servicing

Steering lock cylinder - ignition switch
removing and installing


CAUTION!

Disconnect the battery Ground (GND) strap
before working on the electrical system.

Notes:

Before disconnecting the battery determine the
correct coding for the anti-theft radio.
After reconnecting the battery, check and
activate the vehicle's electrical equipment
(radio, clock, comfort and convenience
features, etc.) as outlined in this Repair Manual
or the Owner's Manual.

Notes:
For removing, the lock cylinder, always use the
spare key or shop key with the flat plastic
handle.
The master key equipped with a light and/or
remote control transmitter in its handle is
Pa
ge 1 of 7 I
gnition switch lock c
ylinder, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.10

94-43

Ignition switch, removing and installing


Removing

Note:
It is not necessary to remove the lock cylinder.

- Disconnect battery Ground (GND) strap.

- Remove driver's-side airbag unit and steering
wheel.

Repair Manual, Body Interior, Repair Group
69


- Remove steering column switche Page 94
-
37
.

- Disconnect harness connector from
ignition/starter switch.

Installing - Remove sealing paint from threads of screws -A-.
- Loosen two screws (arrows -A-) slightly and pull ignition/starter switch
out of housing in direction indicated (arrow).
Pa
ge 5 of 7 I
gnition switch lock c
ylinder, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.10