belt AUDI A4 1998 B5 / 1.G Instrument Cluster OBD From Model Year 2000 Workshop Manual

01-101

Output Diagnostic Test Mode (scan tool
function 03)


Notes:

Output Diagnostic Test Mode is only possible
when vehicle is stationary and engine is not
running!
If malfunctions are found during output
Diagnostic Test Mode, determine cause of
malfunction and replace instrument cluster if
necessary.

During the "output Diagnostic Test Mode"
function, all actuators that are installed in the
instrument cluster and coded are activated in
sequence.
There is also a simultaneous parallel sweep
through the indicator range of all analog display
instruments (Engine Coolant Temperature
(ECT) gauge, tachometer, speedometer, fuel
gauge)
Activation of warning lamps
Activation of seat belt warning light

Pa
ge 27 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-104

Output Diagnostic Test Mode Warnin
g lamp test for instrument cluste
r

Indicated on display:
All lamps are switched on that are activated by the processor.
-
Press button.
Output Diagnostic Test Mode Seat belt warnin
g light -K19

Indicated on display:
Seat belt warning light is activated.
Note:
Depending on options/versions, the seat belt warning light may be
activated by the control module coding, that is, if this actuator test is
omitted, the warning light is not active.
-
Press button.
Pa
ge 32 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-111

Initiating coding Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -7-. This selects "Code Control Module", function
07.
- Press -Q- button to confirm input.
Rapid data transfer
Q
07 Code control module

Indicated on display
- Press -Q- button to confirm input.
Code control moduleInput code number XXXXX
(0-32000
)

Indicated on display:
- Input code number using coding table Page 01
-112
. Example:
02242
02 Seat belt warning active
2 Country version US
4 4-cylinder
2 gas engine
Code control module
Q
Input code number 02242
(0-32000
)

Indicated on display:
- Press -Q- button to confirm input.
8D0920830... B5-INST. Clstr. M73 D08 Coding 02242
WSC 06812

Indicated on display:
-
Press button.
Pa
ge 39 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-112

Coding table:

XX Optional equipment/transmission
version
00
02
16 No additional equipment
Seat belt warning active
Navigation I and II
X Country version
0
1
2
3
4
5
6
7
8
9 Germany (D)
RdW Left Hand Drive
USA (US)
Canada (CDN)
Great Britain (GB)
Japan (JP)
Saudi Arabia (SA)
Australia (AUS)
RdW Right Hand Drive
JP Right Hand Drive (RHD)
vehicles
Pa
ge 40 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-113

X Cylinder count
4
6 4-cylinder
6-cylinder
X Engine versions
0
2
4 TDI-engine
gas engine
Turbo-engine

Notes:

Coding can be modified to allow for various
combinations of optional equipment, depending
on what is installed in the vehicle.
If vehicle is equipped with more than one item
of optional equipment and/or transmission
variant that needs to be coded, the overall
coding will be the total of the individual coding
numbers.

Example:
Seat belt warning active and navigation I 02
+ 16 = 18
Pa
ge 42 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2