AUDI A4 1998 B5 / 1.G Interior Monitor Owner's Guide

AUDI A4 1998 B5 / 1.G Interior Monitor Owner's Guide A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/890/w960_890-0.png AUDI A4 1998 B5 / 1.G Interior Monitor Owner's Guide

Page 31 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide Specification: 8 V  
-  End output Diagnostic Test Mode (DTM).
-  Install ultra-sound sensors again
-  Erase DTC memory (function 05)   page 01
-137
 .
-  End output (function 06)   page 01
-139
 .
Pa

Page 32 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide 01-130
      
Checking wiring for pulse signal  
     
-  Remove both ultra-sound sensors.
     
       Repair Manual, Body Interior, Repair Group 
70, B
-pillar trim , removing and installing

Page 33 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide 01-131
      
Code Control Module (scan tool function 
07)
 
      This function can be used to code the interior 
monitoring as follows:  
     Vehicle type: Audi A4 
     Arming mode of anti-theft s

Page 34 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide Rapid data transfer  
Q
07 - Code Control Module
    
Indicated on display  
-  Press -Q- button to confirm input.
Pa
ge 34 of 44 Ultrasonic interior monitorin
g On Board Dia
gnostic 
(OBD
)
11/20/200

Page 35 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide 01-132
 
Code Control ModuleEnter code number XXXXX 
(0-32000)
    
Indicated on display  
- Enter code number:
Coding:  
00101  
00            Place holders, disregard  
   1         Audi A4

Page 36 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide 01-133
      
Read Measuring Value Block (scan tool 
function 08)
 
     
Carrying out "Read Measuring Value Block" 
function 08  
Rapid data transfer  
HELP
Select function XX
    
Indicated on displ

Page 37 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide 01-134
 Read Measuring Value Block, overview
 
Display group 001  
Indicated on Display  
Display value  
Identification  
Read Measuring Value Block 1   0100 1)   1 = switch positions  
1 2 3 4  
100

Page 38 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide 01-135
      
Adaptation (scan tool function 10)
 
      The following changes can be implemented and 
saved using the adaptation function:  
     
Sensitivity settings of the ultra-sound sensors 
can

Page 39 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide 01-136
 
Channel 1 Adaptation 100  Sensitivity in %  
- 1 3-  
    
Indicated on display (sensitivity of sensors is displayed: e.g. 100%)  
Note:  
The factory adjusted maximum sensitivity of the ultr

Page 40 of 44

AUDI A4 1998 B5 / 1.G Interior Monitor Owners Guide Insert address word XX
Pa
ge 40 of 44 Ultrasonic interior monitorin
g On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01
Page:   < prev 1-10 11-20 21-30 31-40 41-50 next >