wheel AUDI A4 1998 B5 / 1.G Suspension Rear Axle Front Wheel Drive Owner's Manual

42-18


10 -
Outer wheel bearing
Do not wash out if bearing is to be re-used
11 -
Outer wheel bearing outer race Use copper arbor to drive outPressing in Fig. 4Apply small quantity of wheel bearing
grease to wheel bearing seat before
pressing in bearing race
12 -
Brake disc with wheel hub
13 -
ABS wheel speed sensor rotor Drive off evenly using copper arbor through
tapped holes in wheel hub Pressing in Fig. 5
14 -
Inner wheel bearing outer race
Use copper arbor to drive out outer raceApply small quantity of wheel bearing
grease to wheel bearing seat before
pressing in bearing race
Pa
ge 21 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-19


15 -
Inner wheel bearing
Do not wash out if bearing is to be re-used
16 -
Seal Always replaceDifferent versions parts catalog
microfiche Fill area between sealing lips with multi-
purpose grease Fig. 7

Pa
ge 22 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-20


Fig. 1 Removing grease cap
- Remove grease cap from seat by tapping gently on claw of tool.

Notes: Fig. 2 Driving on grease cap
Damaged (dented/buckled) grease caps permit the penetration of
moisture and must always be replaced. When installing a grease cap always use the tool shown to prevent
damage.
Pa
ge 23 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-21


Note:
Wheel bearing play is correct when the thrust washer can just be moved
using a screwdriver simply by applying pressure, without having to apply
force. Fig. 3 Setting wheel bearing clearance
- Secure with slotted ring and new cotter pin.

Fig. 4 Pressing in outer race for outer wheel bearing
- Apply small quantity of wheel bearing grease to wheel bearing seat
before pressing in bearing race.
Pa
ge 24 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-22


Fig. 5 Pressing in ABS wheel speed sensor rotor

Fig. 6 Pressing in outer race for inner wheel bearing
- Apply small quantity of wheel bearing grease to wheel bearing seat
before pressing in bearing race.
Pa
ge 25 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-23


From m.y. 1998 , revised stub axles and dust lips will be installed
parts catalog microfiche.
Note:
For greater clarity, the seal is shown removed. Fig. 7 Fill groove (arrow) with grease
Pa
ge 26 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1