length AUDI A4 1998 B5 / 1.G Suspension Wheel Alignment Workshop Manual

44-33

Notes:
For all suspension versions (1BA, 1BC, 1BE,
1BP and 1BB):

The defined starting position B1 is the position
the springs must be in when using the wheel
alignment program to check the actual toe-in
setting C1 for each wheel ( page 44
-27
).
Setting C1 should match the specification + 10`
30` (rough pre-adjustment). If necessary, the
toe-in must be corrected by adjusting the tie rod
length.

Wheel alignment specifications page 44
-
11
.

If the settings need to be corrected, this will be
indicated by the wheel alignment program.

CAUTION!
Make sure that the wheels do not loose
contact with the turntables during the lifting
operation.
If wheels do loose contact, do not move the
turntables. Otherwise incorrect
measurements will result.
Pa
ge 32 of 37 Wheel ali
gnment
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.44.2