light AUDI A4 1998 B5 / 1.G Suspension Workshop Manual

40-4


13 -
Guide link with hydraulic bushing
Removing and installing page 40
-97
Replace hydraulic bushing if leaking
page 40
-99

14 -
Self-locking nut
Always replace100 Nm (74 ft lb)
15 -
Wheel bearing housing Removing and installing on vehicles with
headlight range control page 40
-14

Removing and installing page 40
-54
Servicing page 40
-60
16 -
Splash shield
17 -
Collar bolt
Always replaceWhen tightening, vehicle must be standing
on its wheels
Tightening torques:M14: 115 Nm (85 ft lb) + 1/2-turn (180 )M16: 190 Nm (140 ft lb) + 1/2-turn (180 )
Pa
ge 5 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1

Removing and installing on vehicles with
headlight range control page 40
-14

Replacing bushing page 40
-94
Pa
ge 7 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1

40-6


26 -
Bolt M12 x 1.5 x 110
Always replace110 Nm (81 ft lb) + 1/4-turn (90 )
27 -
Bolt M10 x 70
Always replace75 Nm (55 ft lb)
28 -
Self-locking nut Always replace100 Nm (74 ft lb)Replace only with exact same type of
special nut
29 -
Clamp Always replaceAttached onto lower track control link - 25 -
30 -
Subframe Removing and installing on vehicles with
headlight range control page 40
-14

Removing and installing page 40
-77
Replacing bushing page 40
-86
Pa
ge 8 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1