AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual A4 1999 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1256/w960_1256-0.png AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual

Page 1 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-1
 
     
Shift linkage, servicing 
     
Notes:  
     
Adjusting  Page 34
-12
 .
     
To remove the complete shift linkage, remove 
the exhaust system. 
       Repair Manual, Engine Mechanical,

Page 2 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-2
 
  
1 - 
Shift knob 
2 - 
Bushing 
3 - 
Housing cover 
Carefully pry out latch in rear section of 
center console 
4 - 
Top part of retaining frame 
5 - 
Bottom part of retaining frame 
6 - 
Bus

Page 3 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-3
 
  
12 - 
Compression spring 
13 - 
Bushing 
Rounded side faces shift lever
14 - 
Shift lever Can be installed into ball housing in one 
position only 
15 - 
Spacer tube 
16 - 
Nut 8 Nm (71 in.

Page 4 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-4
 
  
23 - 
Circlip 
Always replaceRemove before removing ball stopRounded side faces ball housing (item - 25 
-) 
24 - 
Buffer 
25 - 
Ball housing Buffers for ball stop on left and right must 
be

Page 5 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-5
 
  
33 - 
Nut 
Always replace10 Nm (7 ft lb)Self locking
34 - 
Shift fork 
35 - 
Bolt 23 Nm (17 ft lb)
36 - 
Clamp 
37 - 
Shift rod With shift coupling
38 - 
Bolt Always replace23 Nm (17 ft lb)S

Page 6 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-6
 
  
40 - 
Bolt 
40 Nm (30 ft lb)
41 - 
Nut 40 Nm (30 ft lb)
42 - 
Bolt 
43 - 
4546Mounting bracket for pivot rod Revised after 06.96   Fig. 1
44 - 
Tensioning ring 
45 - 
Boot 
To remove and ins

Page 7 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-7
 
    
As of 06.96 the pivot rod is bolted directly to the transmission cover. The 
additional mounting bracket ( item -43-,   Page 34
-6 ) and its bolts are 
deleted. For this reason the transmi

Page 8 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-8
      
Shift mechanism, removing and 
installing
 
     
Removing  
     
-  Remove shift knob and housing cover.
     
- Remove 
center 
console 
       Repair Manual, Body 
Interior, Repair Gro

Page 9 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-9
      
-  Separate exhaust system behind Three Way 
Catalytic Converter (TWC), if necessary remove 
front exhaust system together with Three Way 
Catalytic Converter (TWC). 
       Repair Manual,

Page 10 of 18

AUDI A4 1999 B5 / 1.G 01A Transmission Shift Linkage Service Workshop Manual 34-10
      
Installing  
      Install in reverse order of removal, note the 
following:  
     
-  Push shift rod on so that securing bolt fits into 
recess of shift rod. 
    
 Repair Manual, Engin
Page:   1-10 11-20 next >