sensor AUDI A4 1999 B5 / 1.G AHA Engine On Board Diagnostic Workshop Manual

01-1


On Board Diagnostic (OBD)

Function

The Multiport Fuel Injection (MFI) system is
equipped with an Engine Control Module (ECM) -
J220- with On Board Diagnostic (OBD)
capability.
When malfunctions occur in sensors or
components monitored by OBD, Diagnostic
Trouble Codes (DTC) are stored in DTC
memory.
Stored DTCs are identified using the VAG1551
Scan Tool (ST) page 01
-16
.
After the necessary repairs are completed, DTC
memory must be erased page 01
-49
.
OBD II legal regulations require a display
(readiness code) that shows inspection
readiness for the annual exhaust emissions test.
The readiness code shows that every component
and/or system that affects exhaust emissions,
which can lead to the Malfunction Indicator Lamp
(MIL) being switched on, has been operated at
least once with positive results.
The readiness code is reset and/or erased and
must be regenerated every time DTC memory is
erased, the power supply to the ECM -J220- is
interrupted (example: when connecting
Pa
ge 1 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-7
Modes under address word 33: Mode 1: Transfer diagnostic data Ignition switched on -or- Engine running at idle
Mode 2: Transfer operating conditions Ignition switched on -or- Engine running at idle
Mode 3: Check DTC memory Ignition switched on -or- Engine running at idle
Mode 4: Erase diagnosis information Ignition switched on -or- Engine running at idle
Mode 5: Output of HO2S signals Ignition switched on -or- Engine running at idle
Mode 6: Transfer measuring values Ignition switched on -or- Engine running at idle
Mode 7: Check DTC memory Ignition switched on -or- Engine running at idle Under Address word 33, Modes 1-7 can be addressed.
Under Mode 1, individual measuring values can be displayed. Mode 1 is not recommended for use in an Audi Service
department, because these values can be displayed much more precisely using address word 01 and "Basic Setting"
function 04 or "Read Measuring Value Block" function 08.
Mode 2 shows the operating conditions under which the stored malfunctions were recognized.
With Mode 3, DTC memory is checked-with Mode 4, DTC memory is erased.
Mode 5 shows the statistical value of the oxygen sensors as mandated by law. As these values have no direct bearing on
oxygen sensor diagnosis, Mode 5 is of no particular value in an Audi Service department.
Under Mode 6, values can be checked for components and systems that are not continuously monitored.
Pa
ge 10 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-11

Notes:
If the ECM version that corresponds to the
vehicle is not displayed, replace ECM page
01
-68
. Incorrect ECM coding leads to:

Performance problems (e.g. jerky shifting,
abrupt load changes, etc.)
Increased fuel consumption
Elevated exhaust gas values
Reduction in transmission service life
Storage of non-existent malfunctions in DTC
memory
Necessary functions not being carried out
(oxygen sensor control, actuation of EVAP
canister system, etc.)

-
Press button to advance through program
sequence.
Rapid data transfer
HELP
Select function XX

Indicated on display
- Continue as specified in procedures for specific OBD functions.
Pa
ge 16 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-19

Diagnostic Trouble Code
(DTC)
Malfunction text
MIL
Corrective action
SAE
VAG



P0102 16486 Mass or Volume Air Flow
Circ.
Low Input 2
Dcy - Check Mass Air Flow (MAF) sensor -G70- page 24
-68

P0103 16487 Mass or Volume Air Flow
Circ.
High Input
P0112 16496 Intake Air Temp. Circ.
Low Input 2
Dcy - Check Intake Air Temperature (IAT) sensor -G42-
page 24
-82

P0113 16497 Intake Air Temp. Circ.
High Input
P0116 16500 Engine Coolant Temp. Circ.
Range/Performance 2
Dcy - Check Engine Coolant Temperature (ECT) sensor -
G62- page 24
-75

P0117 16501 Engine Coolant Temp. Circ.
Low Input
P0118 16502 Engine Coolant Temp. Circ.
High Input
P0121 16505 Throttle/Pedal Pos. Sensor A 2
Pa
ge 26 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

Circ.
Range/Performance Dcy
- Check Throttle Position (TP) sensor -G69- page
24
-128

P0122 16506 Throttle/Pedal Pos. Sensor A
Circ.
Low Input
P0123 16507 Throttle/Pedal Pos. Sensor A
Circ.
High Input
Pa
ge 27 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-20

Diagnostic Trouble
Code (DTC)
Malfunction text
MIL
Corrective action
SAE
VAG



P0130 16514 O2 Sensor Circ.,
Bank1-Sensor1
Malfunction 2
Dcy - Check Heated Oxygen Sensor (HO2S) -G39- and O2S control
(bank 1, sensor1) page 24
-22

P0131 16515 O2 Sensor Circ.,
Bank1-Sensor1
Low Voltage
P0132 16516 O2 Sensor Circ.,
Bank1-Sensor1
High Voltage
P0133 16517 O2 Sensor Circ.,
Bank1-Sensor1
Slow Response 2
Dcy - Check HO2S -G39- aging (bank 1, sensor1) page 24
-60
P0134 16518 O2 Sensor Circ.,
Bank1-Sensor1
No Activity Detected 2
Dcy - Check HO2S -G39- and O2S control (bank 1, sensor1) page
24
-22

P0136 16520 O2 Sensor Circ.,
Bank1-Sensor2
Malfunction 2
Dcy - Check Oxygen Sensor (O2S) behind Three Way Catalytic
Converter (TWC) -G130- (bank 1, sensor 2) page 24
-42

Pa
ge 28 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

P0137 16521 O2 Sensor Circ.,
Bank1-Sensor2
Low Voltage
P0138 16522 O2 Sensor Circ.,
Bank1-Sensor2
High Voltage
P0140 16524 O2 Sensor Circ.,
Bank1-Sensor2
No Activity Detected
Pa
ge 29 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-21

Diagnostic Trouble
Code (DTC)
Malfunction text
MIL
Corrective action
SAE
VAG



P0150 16534 O2 Sensor Circ.,
Bank2-Sensor1
Malfunction 2
Dcy - Check Heated Oxygen Sensor (HO2S) -G108- and Oxygen
Sensor (O2S) control (bank 2, sensor 1) page 24
-22

P0151 16535 O2 Sensor Circ.,
Bank2-Sensor1
Low Voltage
P0152 16536 O2 Sensor Circ.,
Bank2-Sensor1
High Voltage
P0153 16537 O2 Sensor Circ.,
Bank2-Sensor1
Slow Response 2
Dcy - Check HO2S -G108- aging (bank 2, sensor 1) page 24
-63
P0154 16538 O2 Sensor Circ.,
Bank2-Sensor1
No Activity Detected 2
Dcy - Check HO2S -G108- and O2S control (bank 2, sensor 1)
page 24
-22

P0156 16540 O2 Sensor Circ.,
Bank2-Sensor2
Malfunction 2
Dcy - Check O2S 2 behind Three Way Catalytic Converter (TWC) -
G131- (bank 2, sensor 2) page 24
-52

Pa
ge 30 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

P0157 16541 O2 Sensor Circ.,
Bank2-Sensor2
Low Voltage
P0158 16542 O2 Sensor Circ., Bank
2-Sensor2
High Voltage
P0160 16544 O2 Sensor Circ.,
Bank2-Sensor2
No Activity Detected
Pa
ge 31 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-22

Diagnostic Trouble Code
(DTC)
Malfunction text
MIL
Corrective action
SAE
VAG



P0300 16684 Random/Multiple
Cylinder
Misfire Detected 2 Dcy /
blink - Fuel level too low, check fuel level and add if
necessary
- Check misfire detection page 28
-16
- Check fuel injectors page 24
-102
- Carry out output Diagnostic Test Mode (DTM)
page 01
-51

- Check engine speed (RPM) sensor -G28- page 24
-88

P0301 16685 Cyl. 1
Misfire Detected
P0302 16686 Cyl. 2
Misfire Detected
P0303 16687 Cyl. 3
Misfire Detected
P0304 16688 Cyl. 4
Misfire Detected
P0305 16689 Cyl. 5

Pa
ge 32 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1