AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual A4 1999 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/941/w960_941-0.png AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual

Page 1 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-47
 
  
Sealing flanges and 
flywheel/drive plate, removing 
and installing Note:  
For repairs to the clutch: 
 Repair Manual, 5 Spd. Manual Transmission 012/01W Front Wheel Drive, Repair Group 30

Page 2 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-48
 
  
3 - 
Sealing ring 
Replacing  Page 13
-51
Do not oil sealing lip of oil seal
4 - 
Sump Removing and installing   Page 17
-11
5 - 
15 Nm 
6 - 
Cylinder block 
Removing and installing cranksh

Page 3 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-49
 
  
8 - 
Securing bolt for dual-mass flywheel or 
drive plate 
Always replaceTightening torque for dual mass flywheel 
Page 13
-63
 
Tightening torque for drive plate (vehicles 
with automatic

Page 4 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-50
 
  
10 - 
15 Nm 
11 - 
Rear sealing flange with oil seal 
With gasket for cylinder blockDo not oil sealing lip of oil sealMake sure that the sealing lip of the sealing 
ring is not folded back

Page 5 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-51
 
  
Crankshaft oil seal on pulley end, 
replacing
 
Special tools and equipment   
 
Oil seal extractor 3203
 Holding tool 3415
 Assembly tool T10053
Pa
ge 5 of 20 Sealin
g flan
ges and fl
ywhe

Page 6 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-52
      
Removing  
     
Engine in vehicle 
     Lock carrier must be in service position   
Page 13
-1 . 
     
-  Remove toothed belt   Page 13
-40
 .
    
-  Unbolt stop for torque reaction su

Page 7 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-53
      
-  Before applying oil seal extractor, thread central 
bolt for toothed belt sprocket into crankshaft as 
far as it will go. 
     
-  Remove inner section of oil seal extractor 3203 
one

Page 8 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-54
      
Installing  
     
Note:  
     Do not lubricate sealing lip or outer 
circumference of seal before pressing in. 
    
-  Place guide sleeve T10053/1 onto crankshaft journal.
-  Slide oil

Page 9 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-55
      
-  Replace central bolt for toothed belt sprocket.
    
Note: 
Tightening torque  1) Replace bolt  2) 90 corresponds to a quarter turn   -  Remove crankshaft toothed belt sprocket. To do

Page 10 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-56
      
Front sealing flange, removing and 
installing
 
     
Special tools, material and equipment  
    
Holding tool 3415
    
Assembly tool T10053Electric drill with plastic brush attachment
Page:   1-10 11-20 next >