oil AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 1999, Model line: A4, Model: AUDI A4 1999 B5 / 1.G
Pages: 20, PDF Size: 0.39 MB
AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual A4 1999 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/941/w960_941-0.png AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual
Search: (key battery, battery, parking sensors, oil pressure, set clock, battery capacity)

Page 2 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-48 3 - Sealing ring Replacing Page 13 -51 Do not oil sealing lip of oil seal 4 - Sump Removing and installing Page 17 -11 5 - 15 Nm 6 - Cylinder block Removing and installing cranksh

Page 4 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-50 10 - 15 Nm 11 - Rear sealing flange with oil seal With gasket for cylinder blockDo not oil sealing lip of oil sealMake sure that the sealing lip of the sealing ring is not folded back

Page 5 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-51 Crankshaft oil seal on pulley end, replacing Special tools and equipment Oil seal extractor 3203 Holding tool 3415 Assembly tool T10053 Pa ge 5 of 20 Sealin g flan ges and fl ywhe

Page 7 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-53 - Before applying oil seal extractor, thread central bolt for toothed belt sprocket into crankshaft as far as it will go. - Remove inner section of oil seal extractor 3203 one

Page 8 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-54 Installing Note: Do not lubricate sealing lip or outer circumference of seal before pressing in. - Place guide sleeve T10053/1 onto crankshaft journal. - Slide oil

Page 9 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-55 - Replace central bolt for toothed belt sprocket. Note: Tightening torque 1) Replace bolt 2) 90 corresponds to a quarter turn - Remove crankshaft toothed belt sprocket. To do

Page 12 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-58 - Remove toothed belt sprocket from crankshaft. To do this, counter hold sprocket with 3415. - Remove oil pan Page 17 -11 - Remove bolts -1 to 6-. - Pry sealing flange loose

Page 13 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-59 WARNING! Wear protective glasses. Installing Note: The sealing flange must be installed within 5 minutes after applying silicone sealant. - Remove remaining sealant from sealing

Page 14 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-60 Note: The bead of sealant must not be thicker than 3 mm, otherwise excess sealant will enter the oil pan and obstruct the strainer in the oil intake line. Note: Use guide sleeve T10

Page 15 of 20

AUDI A4 1999 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-61 - Install crankshaft oil seal Page 13 -54 . - Install toothed belt (adjust valve timing) Page 13 -44 . - Install bracket for A/C compressor -Item 5 -, Page 13 -1
Search: (bolt pattern, remote control, gearbox, USB, lumbar support, brake light)