brake AUDI A4 1999 B5 / 1.G Suspension Front Struts Remove And Install Workshop Manual

40-39


Suspension strut, removing
and installing

Removing

- Remove wheel trim.

On light alloy wheels use puller in vehicle tool kit
to remove trim cap.

- Remove wheels.

Note:
For vehicles with headlight range control page 40
-14
.
CAUTION!
To prevent damage to the joint of the lower links from excessive
rebound, support using VAG1383-A (engine and transmission lifter). - Remove rubber grommets in plenum chamber (arrows).

CAUTION! - Remove suspension strut nuts -1- from body.
- Detach ABS wheel speed sensor wire from bracket at brake caliper.
Pa
ge 1 of 16 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.4

Be careful not to damage the surface of the brake lines.
Pa
ge 2 of 16 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.4

40-43

- Insert ABS wheel speed sensor wire into holder
at brake caliper.

- Install new nuts for both suspension struts and
tighten to 20 Nm (15 ft lb).

CAUTION!

Be careful not to damage the surface of the
brake lines.

- Re-install rubber grommets into plenum
chamber.

- Install wheel and tighten bolts to 120 Nm (89 ft
lb).
Pa
ge 6 of 16 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.4