wheel alignment AUDI A4 1999 B5 / 1.G Suspension Front Struts Remove And Install Workshop Manual

40-40


CAUTION!
The guide link must be removed from the wheel bearing housing in order
to be able to remove the bolt mounting the suspension strut to the track
control link. - Remove nut -1- and bolt, then pull both links -2- upward and out.
- Swivel wheel bearing housing aside in direction of arrow.
Do not use a chisel (or similar) to widen the slots in the wheel
bearing housing. Do not loosen bolts -3- and -4-. Otherwise, the wheel alignment
must be checked.
- If necessary, counterhold ball joint using 4 mm hex wrench.

Note:
Be careful not to damage the boot. - Unscrew nut for guide link ball joint and press out ball joint.
Pa
ge 3 of 16 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.4