service AUDI A4 1999 B5 / 1.G Suspension Rear Axle Front Wheel Drive Workshop Manual

42-13

CAUTION!

Vehicle must be standing on its wheels when
tightening guide bushing to rear axle bolts.
Otherwise bonded rubber bushings will be
subjected to torsion resulting in shortened
service life

- Tighten guide bushing bolts ( page 42
-2 ,
items -3- and -5-).

Tightening torque: 80 Nm (59 ft lb) + 1/4-turn
(90 )
CAUTION!

Vehicle must be standing on its wheels when
tightening suspension strut to rear axle bolts.
Otherwise bonded rubber bushings will be
subjected to torsion resulting in shortened
service life

- Tighten suspension strut to axle beam bolts (
page 42
-2 , items -6- and -8-).

Tightening torque: 50 Nm (37 ft lb) + 1/4-turn
(90 )
-
On vehicles with headlight range control, tighten
bolted connection between headlight range
Pa
ge 15 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-15


Guide bushing installation position
The guide bushing must be pulled into the rear axle with the arrow on the
3128/1a installation piece pointing in direction -B-.

Pulling in guide bushing
The remainder of the installation is the reverse of removal.
CAUTION!
Vehicle must be standing on its wheels when tightening guide
bushing to rear axle bolts. Otherwise bonded rubber bushings will
be subjected to torsion resulting in shortened service life
Pa
ge 18 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1