AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual https://www.carmanualsonline.info/img/6/1231/w960_1231-0.png AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual

Page 1 of 9

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-114
 
  
Differential, removing and 
installing Notes: 
 
Refer to general repair instructions   Page 00
-
14
 . 
 Mounting final drive to repair stand   Page 39
-
110
 . 
 Adjustments are required

Page 2 of 9

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual List of adjustments   Page 39
-149
Pa
ge 2 of 9 Differential, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.14

Page 3 of 9

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-115
 
  
5 - 
Final drive cover1) 
Always replace O-ringWith O-ringLubricate O-ring with oil when installing
6 - 
Torx  bolt 25 Nm (18 ft lb)
7 - 
Right seal Replacing  Page 39
-100
8 - 
Socket-hea

Page 4 of 9

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual Holds magnet in positionDrive in onto stop
Pa
ge 4 of 9 Differential, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.14

Page 5 of 9

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-116
 
  
14 - 
Magnet 
15 - 
Small tapered roller bearing outer race 1) 
Removing  Page 39
-126, Fig. 1
Installing  Fig. 2, Page 39
-126
16 - 
Shim S2 
Note thicknessList of adjustments   Page 39
-

Page 6 of 9

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-117
 
    
Fig. 1  Removing and installing drive flange
-  To loosen mounting bolt, screw in 2 bolts in drive flange and counter-
hold using pry bar. 
-  Pull out drive flange using screwed in bolt

Page 7 of 9

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-118
 
    
The breather sleeve should project 13 mm (0.512 in.) dimension -a- out of 
final drive housing after pressing in.  
The slot in the rubber valve should be in line with the direction of t

Page 8 of 9

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-119
      
Removing  
     
Final drive removed 
     
Special tools and equipment  
      VAG1306 drip tray  
      Secure complete final drive to repair stand using 
VW540 bracket   Page 39
-110

Page 9 of 9

AUDI A4 2000 B5 / 1.G 01A Transmission Differential Remove And Install Workshop Manual 39-120
      
Installing  
      Install in reverse order of removal, note the 
following:  
     
- Install differential.
     
-  Replace O-ring for final drive cover and lubricate 
before installin