transmission AUDI A4 2000 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install Workshop Manual

AUDI A4 2000 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install Workshop Manual A4 2000 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1249/w960_1249-0.png AUDI A4 2000 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install Workshop Manual

Page 1 of 13

AUDI A4 2000 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install Workshop Manual 39-134
 
     
Pinion shaft, removing, 
installing and servicing 
     
Special tools and equipment 
     
VW401 thrust plate
     VW402 thrust plate
     VW407 punch 
     VW408A punch
     VW412 thr

Page 3 of 13

AUDI A4 2000 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install Workshop Manual 39-135
      
3062 thrust pad 
     3138 drift
     3253 wheel bearing assembly set with 3253/3 
and 3253/4 
     3304 bracket 
     VAG1383A engine/transmission support 
     VAG1359/2 universal moun

Page 7 of 13

AUDI A4 2000 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install Workshop Manual 39-139
 
    
Fig. 1  Tool to loosen and tighten pinion shaft nut
   A- 32 mm socket
    
Fig. 2  Removing pinion shaft nut
-  Screw 3304 bracket on using two M8 x 30 hex-head bolts.
-  Final drive mu

Page 12 of 13

AUDI A4 2000 B5 / 1.G 01A Transmission Pinion Shaft Remove And Install Workshop Manual 39-144
 
    
Note:  
If the specified friction torque is exceeded, the spacer sleeve must be 
replaced and the adjustment repeated. A spacer sleeve that has been 
over-compressed at any time cannot b