AUDI A4 2000 B5 / 1.G 01V Transmission Front Final Drive Service User Guide
  A4 2000 B5 / 1.G
  AUDI
  AUDI
  https://www.carmanualsonline.info/img/6/1195/w960_1195-0.png
  AUDI A4 2000 B5 / 1.G 01V Transmission Front Final Drive Service User Guide
            
        
  
 
Page 27 of 37
39-29
      
Notes:  
     
A faulty seal lets ATF or gear oil escape into the 
converter housing via the center vent of the 
shaft seal (between the two sealing lips). 
     In addition, a faulty seal can let ATF escape 
into the center differential. It over-fills and oil 
escapes at the differential vent. 
     
Removing  
     
-  Loosen bolt drive axle/wheel hub while the 
vehicle is still standing on its wheels. 
     
-  Remove front wheels.
     
-  Remove heat shield for right drive axle.
     
- Remove drive axles:
     
       Repair Manual, Suspension, Wheels, 
Steering, Repair Group 40; Drive axle, removing and installing
   
Pa
ge 27 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2 
        
        
        Page 32 of 37
39-34
 
    
Tightening sequence:  
 Repair Manual, Suspension, Wheels, Steering, Repair Group 40; Drive axle, removing and installing
    -  Install cover for final drive. 
1. Stage: Tighten bolts 1 to 3 by hand2. Stage: Tighten bolts 1 to 12 in mentioned sequence to tightening 
torque. 
-  Install right drive flange. 
-  Install right transmission support   page 37
-125
 .
-  Installing drive axles: -  Top-up and check gear oil in front final drive   page 39
-1 .
Pa
ge 32 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2 
        
        
        Page 34 of 37
39-36
      
O-ring at cover for final drive, replacing
 
     
Special tools and equipment  
    
Removing  
 Repair Manual, Engine Mechanical, Repair Group 26; removing and 
installing exhaust system.   
VAG1306 drip tray
-  Loosen bolt drive axle/wheel hub while the vehicle is still standing on 
its wheels. 
-  Remove right wheel. 
-  Remove heat shield for right drive axle.
-  Remove right front exhaust pipe:
Pa
ge 34 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2 
        
        
        Page 35 of 37
39-37
      
-  Remove right drive axle: 
     
       Repair Manual, Suspension, Wheels, 
Steering, Repair Group 40; Drive axle, removing and installing
   
     
-  Remove right transmission support   page 37
-
125
 . 
    
-  Remove bolt for flange shaft (arrow) while securing against turning 
using a drift. 
-  Place VAG1306 drip tray underneath.
-  Remove right drive flange. 
    
-  Remove bolts for final drive cover opposite of shown tightening 
sequence and remove cover. 
Pa
ge 35 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2 
        
        
        Page 37 of 37
39-39
      
-  Install right transmission support   page 37
-
125
 . 
     
-  Install drive axle.
     
       Repair Manual, Suspension, Wheels, 
Steering, Repair Group 40; Drive axle, removing and installing
   
     
-  Top-up and check gear oil in front final drive   
page 39
-1 . 
     
Tightening torques  
     
Component  
  
Nm  
Cover for front final drive to transmission 
housing    
23  
Drive flange to transmission      23  
Heat shield for driveshaft to transmission     
23  
Pa
ge 37 of 37 Front final drive, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.2