AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Owner's Guide

AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Owner's Guide A4 2000 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1048/w960_1048-0.png AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Owner's Guide
Trending: sensor, check engine, buttons, display, wiring

Page 31 of 36

AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Owners Guide 24-150
      
Throttle valve control module, 
adaptation to Engine Control Module 
(ECM)
 
      If the throttle valve control module -J338- is 
removed and installed, or replaced, adaptation of 
the

Page 32 of 36

AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Owners Guide      
       Repair Manual, Fuel Supply System, Repair 
Group 20
   
     
Cruise control adjustment OK 
     Power supply for throttle valve control 
module OK; checking   page 24
-130
 
Pa
ge 32 of

Page 33 of 36

AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Owners Guide 24-151
      
Test procedure  
     
-  Connect VAG1551 or VAG1552 scan tool and 
press buttons -0- and -1- to insert "Engine 
Electronics" address word 01 (with ignition 
switched on; engine not runn

Page 34 of 36

AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Owners Guide 24-152
      
-  Compare display with specified values (display 
fields 1-4): 
  
Display fields  
  
1   2   3   4  
Display group 60: Basic setting-throttle valve control module  
Display  
xxx   
x

Page 35 of 36

AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Owners Guide (ADP. ERROR indicates unsuccessful 
adaptation)  
  
   If displayed values are NOT OK:  
- Check DTC memory (   page 01
-16
 ) 
- Check throttle valve control module (   page 24
-128
 )
Pa
ge 35 of 3

Page 36 of 36

AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Owners Guide 24-153
      
-  End adaptation as soon as possible after 30 
seconds by pressing  button.       If displayed values are OK:  
     
-  Press buttons -0- and -6- to select "End Output" 
function 06, a
Page:   < prev 1-10 11-20 21-30 31-40
Trending: check engine, sensor, display, buttons, wiring