fuel pump AUDI A4 2000 B5 / 1.G APB Engine Motronic Syst
[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A4, Model: AUDI A4 2000 B5 / 1.GPages: 166, PDF Size: 0.53 MB
Page 11 of 166

01-9
      
Vehicle diagnostic, testing and 
information system VAS5051 or 
VAG1551, connecting and selecting 
functions
 
     
Requirements  
     
Fuses for engine electronics OK 
     Fuel pump relay OK 
     Battery voltage at least 11 V 
     Ground (GND) connection for engine and 
transmission OK 
     
-  Switch ignition off.
    
Note:  
The Data Link Connector (DLC) is located below the dash, to the left of 
the steering column.  -  Connect vehicle diagnostic, testing and information system VAS5051 
with VAS5051/1 diagnostic cable. As an alternative, connect VAG1551 
scan tool with VAG1551/3B diagnostic cable. 
Pa
ge 11 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 70 of 166

01-58
 
DTC  
Description of 
malfunction  
Corrective action  
SAE  
VAG  
  
  
P1470   17878   EVAP Emission Contr. 
LDP Circ  
Electrical Malfunction 
2)  - Check Leak Detection Pump (LDP) 
P1471   17879   EVAP Emission Contr. 
LDP Circ  
Short to B+ 
2)   Repair Manual, Fuel Supply System, Repair Group 20, Components of EVAP 
system servicing, Checking Leak Detection Pump (LDP) 
-V144
   
P1472   17880   EVAP Emission Contr. 
LDP Circ  
Short to Ground 
2)    
P1473   17881   EVAP Emission Contr. 
LDP Circ  
Open Circuit 
2)    
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is 
recognized after the engine has been restarted. Significance of MIL   Page 01
-3 .  
Pa
ge 70 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 71 of 166

01-59
 
DTC  
Description of malfunction  
Corrective  
SAE  
VAG  
  
  
P1475   17883   EVAP Emission Contr. LDP 
Circ  
Malfunction/Signal Circ. 
Open 
2)  - Check hoses (pressure/vacuum) to leak detection pump
- Check wiring to pump according to wiring diagram
P1476   17884   EVAP Emission Contr. LDP 
Circ  
Malfunction/Insufficient 
Vacuum 2)   Repair Manual, Fuel Supply System, Repair Group 20, Components of 
EVAP system servicing, Diagram of EVAP system
   
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is 
recognized after the engine has been restarted. Significance of MIL   Page 01
-3 .  
Pa
ge 71 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 72 of 166

01-60
 
DTC  
Description of 
malfunction  
Corrective action  
SAE  
VAG  
  
  
P1477   17885   EVAP Emission Contr. 
LDP Circ  
Malfunction 
2)  
 Repair Manual, Fuel Supply System, Repair Group 20, Components of EVAP 
system servicing, Checking Leak Detection Pump (LDP) 
-V144
    - Check Leak Detection Pump (LDP) 
P1478   17886   EVAP Emission Contr. 
LDP Circ  
Clamped Tube 
Detected 
2)   Repair Manual, Fuel Supply System, Repair Group 20, Components of EVAP 
system servicing, Diagram of EVAP system
    - Check hoses (pressure/vacuum) to LDP.
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is 
recognized after the engine has been restarted. Significance of MIL   Page 01
-3 .  
Pa
ge 72 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 73 of 166

01-61
 
DTC  
Description of malfunction  
Corrective action  
SAE  
VAG  
  
  
P1500   17908   Fuel Pump Relay Circ.  
Electrical Malfunction 
2)  - Check Fuel Pump (FP) relay   Page 24
-33
P1501   17909   Fuel Pump Relay Circ.  
Short to ground 
2)    
P1502   17910   Fuel Pump Relay Circ.  
Short to B+ 
2)    
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is 
recognized after the engine has been restarted. Significance of MIL   Page 01
-3 .  
Pa
ge 73 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 84 of 166

01-70
 
DTC  
Description of malfunction  
Corrective action  
SAE  
VAG  
  
  
P1624   18032   MIL Request Sign. active   Exhaust relevant malfunction from Transmission Control Module (TCM), 
MIL is switched on by TCM  
 Repair Manual, Automatic Transmission, Repair Group 01, Perform 
On Board Diagnostic    - Check DTC Memory of TCM
P1626   18034  
Data-Bus Powertrain 
2)  
Missing message from fuel 
injection pump  - Check CAN-Bus   Page 24
-201
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is 
recognized after the engine has been restarted. Significance of MIL   Page 01
-3 .  
Note for malfunction P1624:  
 
MIL stands for Malfunction Indicator Light. Once the Engine Control Module (ECM) recognizes a malfunction that 
decreases the exhaust emissions it switches the MIL on. 
 The MIL is switched on only by the Engine Control Module (ECM), since the ECM has the only connection to the MIL..
 Malfunction that decrease the exhaust emissions can also be recognized by the Transmission Control Module (TCM), 
These malfunction are also indicated by the MIL. 
Pa
ge 84 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 92 of 166

01-75
      
Output Diagnostic Test Mode (DTM)
 
     
Notes:  
     
The DTM can only be performed with the 
ignition switched on and the engine not running.
     The DTM is terminated if the engine is started 
or if an engine speed pulse is detected. 
     During the DTM, individual control elements will 
be activated for approx. 1 minute, or until the 
test program is advanced to the next control 
element by pressing the   button. 
     
The control elements can be tested either by 
listening or by touching. 
     If the DTM is to be repeated, the engine must 
be started. The engine control module needs to 
detect an engine speed of more than 300 rpm. 
     The electric fuel pump runs continuously 
throughout the DTM. 
Pa
ge 92 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 93 of 166

01-76
      
The DTM activates the following components 
in the stated sequence: 
     
Activation sequence  
1.   EVAP Canister Purge Regulator Valve -
N80-  
2.   Secondary Air Injection (AIR) Solenoid 
Valve -N112-  
(This display appears only on vehicles with 
automatic transmission)  
3.   Secondary Air Injection (AIR) Pump Relay -
J299-  
(This display appears only on vehicles with 
automatic transmission)  
4.   Wastegate Bypass Regulator Valve -N75  
5.   Camshaft adjustment  
6.   Leak Detection Pump for EVAP system  
7.   Recirculating valve for turbocharger -N249  
8.   Cylinder 1 Fuel Injector -N30  
9.   Cylinder 4 Fuel Injector -N33  
10.   Cylinder 3 Fuel Injector -N32  
11.   Cylinder 6 Fuel Injector -N84  
12.   Cylinder 2 Fuel Injector -N31  
Pa
ge 93 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 95 of 166

01-77
      
Test requirements  
     
Fuses for engine electronics OK 
     Fuel pump relay OK 
     
-  Connect vehicle diagnostic, testing and 
information system VAS 5051 or VAG1551 scan 
tool and select engine electronics control 
module by entering address word "01"   Page 01
-9 . When doing this the ignition must be 
switched on. 
Rapid data transfer 
HELP
Select function XX
    
Indicated on display  
-  Press buttons -0- and -3- to select function "Output Diagnostic Test 
Mode." 
Rapid data transfer 
Q
03 - Output Dia
gnostic Test Mode
    
Indicated on display  
Pa
ge 95 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 100 of 166

01-82
      
Actuating Leak Detection Pump (LDP) -V144-  
     
- 
Press button.Output Diagnostic Test Mode EVAP s
ystem leak detection pump
    
Indicated on display  
The change over valve in the LDP is activated for approximately 1 minute 
(clicks), unless the   button pressed to switch to the next actuator.  
Note:  
The clicking can be heard by listening in the area of the left rear wheel 
housing. 
If valve is not actuated (does not click):  
 Repair Manual, Fuel Supply System, Repair Group 20, Components of EVAP system servicing, Checking Leak Detection Pump (LDP) 
-V144
   
Pa
ge 100 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1