sensor AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A4, Model: AUDI A4 2000 B5 / 1.G
Pages: 78, PDF Size: 1 MB
AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual A4 2000 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1064/w960_1064-0.png AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual
Search: (oil filter, manual radio set, phone, bulb, water pump, child seat)

Page 7 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-5 Component locations, overview Notes: Other component Locations Fig. 7 , page Page 24 -11 up to Fig. 12 , page Page 24 -13 . Component Locations without illustration: A

Page 8 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-6 1 - 4-pin harness connector for Oxygen Sensor (O2S) behind Three Way Catalytic Converter (TWC) -G130- and Oxygen Sensor (O2S) Heater 1 -Z29- (bank 1 sensor 2) green 2 - 4-pin harness c

Page 9 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-7 5 - Secondary Air Injection (AIR) solenoid valve -N112- 6 - Intake Air Temperature (IAT) sensor -G42- 7 - 4-pin harness connector for Heated Oxygen Sensor (HO2S) 2 - G108- before cata

Page 10 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-8 10 - E-box in plenum chamber Motronic Engine Control Module (ECM) - J220- Secondary Air Injection (AIR) Pump Relay - J299- Fig. 10 , page Page 24 -12 11 - Valve -2- for camshaft ad

Page 11 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-9 17 - Engine Coolant Temperature (ECT) sensor -G62- for Engine Control Module (ECM)At coolant line behind cylinder head engine bank 1 with Engine Coolant Temperature (ECT) Sensor -G2- Ch

Page 12 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-10 22 - Camshaft Position (CMP) sensor 2 -G40- Bank 2 23 - Heated Oxygen Sensor (HO2S) 2 -G108- before catalytic converter with Oxygen Sensor (O2S) 2 Heater -Z28- Bank 2, sensor 1 24 - K

Page 13 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-11 Fig. 7 Component location, fault light for power accelerator activation -K132- Fig. 8 Installation position, Throttle Position (TP) sensor -G79- and sender 2 for accelerator ped

Page 16 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-14 Air filter, disassembling and assembling 1 - Cover 2 - Air duct to metering unit 3 - Mass Air Flow (MAF) sensor -G70- 4 - 10 Nm 5 - Connection hose 6 - Seal 7 - Air filter, u

Page 37 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-32 - Measure fuel pressure. Specification: 3.8 to 4.2 bar - If the specified value is not reached, replace pressure regulator on a trial basis and repeat pressure test.

Page 51 of 78

AUDI A4 2000 B5 / 1.G ATQ Engine Motronic Injection System Servicing Workshop Manual 24-43 Fuel injectors, removing and installing - Remove engine cover (arrows). - Remove intake air hose between Mass Air Flow (MAF) sensor and intake air elbow. - Remove all harness
Page:   1-10 11-20 next >
Search: (radiator cap, spark plugs, fuse box, lane assist, catalytic converter, jacking points)