AUDI A4 2000 B5 / 1.G ATQ Engine Oxygen Sensor Control Checking
Manufacturer: AUDI, Model Year: 2000, Model line: A4, Model: AUDI A4 2000 B5 / 1.GPages: 63, PDF Size: 0.31 MB
Page 11 of 63
24-85
Evaluation display group 033 Display field: 1 / 3
Possible cause
Corrective action
Values in range:
-10.0 to -25.0 %
Oxygen sensor heating faulty- Check oxygen sensor heating Page
24
-116
or
Values in range:
Open circuit in wires between oxygen sensor
and control module - Check primary voltage Page 24
-89
10.0 to 25.0 %
or
Value does not fluctuate
by at least 2 %
Short circuit to Ground (GND) or B+ between
oxygen sensor and control module - Check oxygen sensor wires bank 1
Page 24
-90
- Check oxygen sensor wires bank 2
Page 24
-91
False air in intake area- Check intake system for leaks and
repair false air Page 24
-64
Fuel pressure too low or too high- Check fuel pressure regulator Page
24
-30
Fuel return line is kinked or clogged- Check fuel return line.
Pa
ge 11 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 12 of 63
24-86
- Press -C- button.
- Press buttons -0-, -3- and -2- to select "display
group number 032" and press -Q- button to
confirm input. System in Basic Setting 32
1
2
3
4
When indicated on display:
- Check oxygen sensor control in display fields 1 to 4:
Display fields
1 2 3 4
Display group 032: Oxygen sensor adaptation values before catalytic converter
Display
xx.x %
xx.x %
xx.x %
xx.x %
Indicated
Oxygen sensor
adaptation value
Bank 1 at idle
(additive) Oxygen sensor adaptation
value bank 1 at partial
throttle
(multiple) Oxygen sensor
adaptation value
Bank 2 at idle
(additive) Oxygen sensor adaptation
value bank 2 at partial
throttle
(multiple)
Functional
range -25.0 to 25.0 %
-25.0 to 25.0 %
-25.0 to 25.0 %
-25.0 to 25.0 %
Specified
value -10.0 to 10.0 %
can fluctuate
slightly -10.0 to 10.0 %
can fluctuate slightly -10.0 to 10.0 %
can fluctuate
slightly -10.0 to 10.0 %
can fluctuate slightly
Notes
If specified value is not obtained Page 24
-87
Pa
ge 12 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 13 of 63
24-87
Evaluation display group 032 Display field:
1 / 3 or 2 / 4
Possible cause
Corrective action
Oxygen sensor
adaptation value in
range:
-10.0 to .-25.0 %
Oil thinning- Oil change or perform swift country road
test
High oil consumption
Mass Air Flow (MAF) sensor faulty- Mass Air Flow (MAF) sensor, checking
Page 24
-56
Evaporative Emission (EVAP) canister purge
regulator valve remains stuck in open position - Check Evaporative Emission (EVAP)
Canister Purge Regulator Valve Page 24
-
128
Fuel pressure too high- Check fuel pressure regulator Page 24
-
30
Fuel return line is kinked or clogged.- Check fuel return line.
Fuel injector does not close- Check fuel injectors Page 24
-36Pa
ge 13 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 14 of 63
24-88
Evaluation display group 032 Display field:
1 / 3 or 2 / 4
Possible cause
Corrective action
Oxygen sensor
adaptation value in range:
10.0 to 25.0 %
False air in intake area- Check intake system for leaks and repair false
air.
Page 24
-64
.
Fuel pressure too low- Check fuel pressure regulator Page 24
-30
Mass Air Flow (MAF) sensor faulty- Mass Air Flow (MAF) sensor, checking
Page 24
-56
Oxygen sensor heating faulty
Oxygen sensor faulty- Check oxygen sensor heating Page 24
-116
Fuel injector does not open or opens
only partially - Check fuel injectors Page 24
-36
Evaporative Emission (EVAP) Canister
Purge Regulator Valve sticks - Check Evaporative Emission (EVAP) Canister
Purge Regulator Valve Page 24
-128
Ignition coil or spark plug faulty- Check ignition coils Page 28
-7
Pa
ge 14 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 15 of 63
24-89
Checking primary voltage
Component location of harness connectors
Overview of component locations, page Page
24
-5
Note:
Coolant reservoir screws must be removed and
coolant reservoir must be placed to side in order
to access this harness connector. The coolant
hoses can remain connected.
Test requirement:
Fuse for oxygen sensor are OK
- Disconnect 4-pin harness connector leading to
respective oxygen sensor.
If specified value is not obtained: - Connect multimeter between terminal 3 and 4 for voltage
measurement.
- Switch ignition on.
Specification: 0.400 to 0.500 V
- Switch ignition off.
-
Check oxygen sensor wires Bank 1, page Page 24
-90
or Bank Pa
ge 15 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 16 of 63
2, page Page 24
-91
.
Pa
ge 16 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 17 of 63
24-90
Check oxygen sensor wires bank 1 for Heated
Oxygen Sensor (HO2S) 2 -G39-.
Component location of harness connectors
Overview of component locations, page Page
24
-5
- Disconnect black 4-pin harness connector to
bank 1 Heated Oxygen Sensor (HO2S) -G39-.
- Connect VAG1598/31 test box at wiring harness
to ECM, do not connect ECM Page 24
-17
.
- Check the following wire connections for open circuit.Harness connector
Terminal
VAG1598/31 test box
Socket
3 51
4 70
- Repair open circuit if necessary.
- Check wires to each other for short circuit.Harness connector
Terminal
VAG1598/31 test box
Socket
4 51
Pa
ge 17 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 18 of 63
24-91
If no malfunctions are found in wires:
Check oxygen sensor wires bank 2 for Heated Oxygen Sensor
(HO2S) 2 -G108-.
Component location of harness connectors Overview of component
locations, page Page 24
-5 - Check shielded wire for short circuit to sensor wires.
Harness connector
Terminal
VAG1598/31 test box
Socket
3 32
4 32
- Replace Engine Control Module (ECM) Page 24
-21
.
- Disconnect black 4-pin harness connector to bank 2 Heated Oxygen
Sensor (HO2S) 2 -G108-.
- Connect VAG1598/31 test box at wiring harness to ECM, do not
connect ECM Page 24
-17
.
Pa
ge 18 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 19 of 63
24-92
If no malfunctions are found in wires: - Check the following wire connections for open circuit.Harness connector
Terminal
VAG1598/31 test box
Socket
3 12
4 13
- Repair open circuit if necessary.
- Check wires to each other for short circuit.Harness connector
Terminal
VAG1598/31 test box
Socket
4 12
- Check shielded wire for short circuit to sensor wires.Harness connector
Terminal
VAG1598/31 test box
Socket
3 32
4 32
- Replace Engine Control Module (ECM) Page 24
-21
.
Pa
ge 19 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 20 of 63
24-93
Oxygen sensor aging (oxygen sensor
before catalytic converter), checking
Special Tools and Equipment
VAG1788/10 RPM adjuster
Test requirement:
VAS5051 with VAG5051/1
orVAG1551 with VAG1551/3BCoolant temperature at least 80 C Display group 4, display field 3
Pa
ge 20 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3