torque AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A4, Model: AUDI A4 2000 B5 / 1.G
Pages: 20, PDF Size: 0.39 MB
AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual A4 2000 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/941/w960_941-0.png AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual
Search: (park assist, brake pads replacement, fuel additives, steering wheel, bluetooth, open gas tank)

Page 3 of 20

AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-49 8 - Securing bolt for dual-mass flywheel or drive plate Always replaceTightening torque for dual mass flywheel Page 13 -63 Tightening torque for drive plate (vehicles with automatic

Page 6 of 20

AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-52 Removing Engine in vehicle Lock carrier must be in service position Page 13 -1 . - Remove toothed belt Page 13 -40 . - Unbolt stop for torque reaction su

Page 9 of 20

AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-55 - Replace central bolt for toothed belt sprocket. Note: Tightening torque 1) Replace bolt 2) 90 corresponds to a quarter turn - Remove crankshaft toothed belt sprocket. To do

Page 11 of 20

AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-57 Removing Engine in vehicle Lock carrier must be in service position Page 13 -1 . - Remove toothed belt Page 13 -40 . CAUTION! The air conditioner

Page 15 of 20

AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-61 - Install crankshaft oil seal Page 13 -54 . - Install toothed belt (adjust valve timing) Page 13 -44 . - Install bracket for A/C compressor -Item 5 -, Page 13 -1

Page 17 of 20

AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-63 Installing Installation is carried out in the reverse order or removal; note the following: - Replace bolts. Tightening torque Component Nm Dual-mas

Page 19 of 20

AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-65 Installing - Place drive plate in position with shim -2- and washer -1-. Lug -arrow- must face towards torque converter. - Insert at least 3 old securing bolts and tighten to 3

Page 20 of 20

AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-66 If nominal value is exceeded: If specified value is attained: Tightening torque 1) 90 corresponds to a quarter turn - Remove drive plate again and fit without shim -2-. Retig
Search: (key fob battery, engine, refuelling, sunroof, coolant temperature, mirror controls)