wiring AUDI A4 2000 B5 / 1.G Brakes ESP Electrical Testing Workshop Manual

01-302

Test requirements

The "Automatic Test Sequence" was carried
out and it was determined that the
Transmission Control Module (TCM) and
Engine Control Module (ECM) only contain
DTCs relating to ABS.

- Connect the VAG1551 Scan Tool (ST) and
select the address word 00 with ignition
switched on;

- After completing electrical test, check and
erase DTC memories of Transmission Control
Module (TCM) and Engine Control Module
(ECM).

Multi-pin harness connector for ABS control module -J104- in proper
condition, with no bent, broken or corroded terminals. Replace any
damaged terminals using VAS1978 wiring repair kit.
Pa
ge 2 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16

01-303

Note:
The operation manual for the VAS1978 wiring
harness repair kit generally forbids the repair of
any lines in the ABS or related systems. This rule
only pertains to the shielded lines in these
systems.

Ignition and electrical consumers switched
off before beginning testing (headlights,
lighting, fan, etc.).
For steps 13 through 16, raise the vehicle
until the wheels rotate freely. On vehicles
with manual transmission put the gear shift
lever in neutral. On vehicles with automatic
transmission move the selector lever to
position "N".
Pa
ge 3 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16

01-305

Connecting VAG1598/20 test box and
checking ESP system

- Switch ignition off.

- Remove ABS control module -J104-.

Repair manual, Brake System, Repair Group
45


- Disconnect multi-pin connector from ABS control
module -J104-.

- Check multi-pin connector between harness
connector and ABS control module -J104-.

The socket designations on the VAG1598/20 test box are identical to the
terminal designations on the ABS control module -J104- and on the wiring
harness connector.
Electrical Wiring Diagrams, Troubleshooting & Component Locations - Connect VAG1598/20 test box to multi-pin connector of wiring harness.
Pa
ge 5 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16

Electrical Wiring Diagrams, Troubleshooting & Component Locations
Pa
ge 7 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16

01-307

Multi-pin connector at ABS control module (w/EDL) -
J104- Terminal
Connected to...

Terminal
9
Left front ABS wheel speed sensor -G47-
For vehicles with front-wheel-drive:
-
10
Left front ABS wheel speed sensor -G47-
(GND)
-
11
Right rear ABS wheel speed sensor -G44-
-
12
Right rear ABS wheel speed sensor -G44-
(GND)
-
13
Left rear ABS wheel speed sensor -G46-

14
Left rear ABS wheel speed sensor -G46- (GND)
-
15
Right front ABS wheel speed sensor -G45-
-
16
Right front ABS wheel speed sensor -G45-
(GND)
-
17
Not assigned
-
Electrical Wiring Diagrams, Troubleshooting & Component Locations
Pa
ge 8 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16

01-308

Multi-pin connector at ABS control
module (w/EDL) -J104- Terminal
Connected to...

Terminal
18
Sensor for transverse acceleration -G200-; signal wire (control
module 4B0 907 389)
2
18
Sensor for transverse acceleration -G200-; signal wire (combined
sensor for rotation rate and transverse acceleration) (control
module 8D0 907 389/A/D/E)
4
19
Sensor for transverse acceleration -G200-; (Ground -GND-) (control
module 4B0 907 389)
1
19
not occupied; (control module 8D0 907 389/A/D/E)
-
19
not occupied; (control module 8D0 907 389A)
-
20
ABS return flow pump relay -J105-
Hydraulic unit; control wire for ABS return flow pump -V39-
87
14
21
Not assigned
-
22
Hydraulic pump for traction control -V156-; voltage supply
2
23
Not assigned
-
24
Hydraulic pump for traction control -V156-; (GND)
1
Electrical Wiring Diagrams, Troubleshooting & Component Locations
Pa
ge 9 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16

01-309

Multi-pin connector at ABS control module
(w/EDL) -J104- Terminal
Connected to...

Terminal
25
Hydraulic unit; activation of left rear ABS outlet valve -
N136-
11
26
Hydraulic unit; activation of right front ABS inlet valve -N99-

5
27
Not assigned
-
28
Ground (GND) supply, terminal 31
-
29
Ground (GND) supply, terminal 31
-
30
Not assigned
-
31
Instrument cluster; activation of traction control indicator
light; (control module 4B0 907 389)
15
31
Rear left wheel speed sensor output; (control module 8D0
907 389/A/D/E)
-
32
Instrument cluster; ABS/EDL warning light activation
26
33
Not assigned
-
Electrical Wiring Diagrams, Troubleshooting & Component Locations
Pa
ge 10 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16

01-310

Multi-pin connector at ABS control
module (w/EDL) -J104- Terminal
Connected to...

Terminal
34
Sender for rotation rate -G202-; voltage supply; (control module
4B0 907 389)
2
34
Sender for rotation rate -G202-; voltage supply (combined sensor
for rotation rate and transverse acceleration) (control module 8D0
907 389/A/D/E)
1
35
Not assigned
-
36
not occupied; (control module 4B0 907 389)
-
36
ABS solenoid valve relay -J106- (GND); (control module 8D0 907
389/A/D/E)
85
37
ABS solenoid valve relay -J106- (GND); (control module 4B0 907
389/A/D/E)
85
37
not occupied; (control module 8D0 907 389/A/D/E)
-
38
Not assigned
-
39
Not assigned
-
Electrical Wiring Diagrams, Troubleshooting & Component Locations
Pa
ge 11 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16

01-311

Multi-pin connector at ABS control module
(w/EDL) -J104- Terminal
Connected to...

Terminal
40
Not assigned
-
41
Not assigned
-
42
Brake light switch -F; brake test switch
4
43
Not assigned
-
44
Traction control switch
6
45
Not assigned
-
46
Diagnostic connector; K-wire
7
47
Not assigned
-
48
Brake light switch -F-; brake light switch
2
49
ABS hydraulic unit -N55-; activation of pilot valve -1-
traction control -N225-
7
50
ABS hydraulic unit -N55-; activation of pilot valve -2-
traction control -N226-
6
51
Voltage supply; terminal 30 for hydraulic pump for
traction control -V156-;
-
Electrical Wiring Diagrams, Troubleshooting & Component Locations
Pa
ge 12 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16

01-312

Multi-pin connector at ABS control module
(w/EDL) -J104- Terminal
Connected to...

Terminal
52
ABS hydraulic unit -N55-; activation of high pressure
switch valve -2- traction control -N228-
4
53
ABS hydraulic unit -N55-; activation of left rear ABS inlet
valve -N134-
3
54
ABS hydraulic unit -N55-; activation of high pressure
switch valve -1- traction control -N227-
1
55
ABS hydraulic unit -N55-; activation of right front ABS
outlet valve -N100-
9
56
not used
-
57
not used
-
58
not used
-
59
not used
-
60
not used
-
61
Not assigned
-
62
Not assigned
-
63
Not assigned
-
Electrical Wiring Diagrams, Troubleshooting & Component Locations
Pa
ge 13 of 65 Electronic Stabilization Pro
gram
(ESP
), electrical testin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.16