AUDI A4 2000 B5 / 1.G Front Door Trim Workshop Manual
								
                                
                
                
                Manufacturer: AUDI, Model Year: 2000,
                  Model line: A4,
                  Model: AUDI A4 2000 B5 / 1.G
                
                
                 Pages: 22, PDF Size: 0.38 MB
                    
                							
              
              
  
                
              
              
    
        
         
         
  
                                   
  AUDI A4 2000 B5 / 1.G Front Door Trim Workshop Manual
  A4 2000 B5 / 1.G
  AUDI
  AUDI
  https://www.carmanualsonline.info/img/6/884/w960_884-0.png
  AUDI A4 2000 B5 / 1.G Front Door Trim Workshop Manual
            
        
  
 
Trending: lights, torque, door lock, warning, trunk release, wiring, window
Page 1 of 22
70-1
 
  
Front door trim Component locations, overview
 
1 - 
Door trim 
Removing  page 70
-3
2 - 
Outer connecting piece 
3 - 
Outer filler piece 
4 - 
Power window switch insert 
Driver-side  page 70
-9
Passenger-side  page 70
-10
5 - 
Speaker (tweeter) 
Removing  page 70
-17
6 - 
Speaker (woofer) 
Removing  page 70
-16
7 - 
Interior door handle 
Removing  page 70
-19
8 - 
Central door locking switch 
Driver-side onlyRemoving  page 70
-15
9 - 
Trim 
Removing  page 70
-18
Pa
ge 1 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
        Page 2 of 22
70-2
 
  
10 - 
Door warning and footwell lights 
Removing and installing   page 70
-33
11 - 
Detent notch base 
12 - 
Inner connecting piece 
13 - 
Inner filler piece 
14 - 
Door knob guide 
15 - 
Front door trim insulation 
Removing and installing   page 70
-5
Pa
ge 2 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
        Page 3 of 22
70-3
      
Front door trim, removing and installing
 
    
Vehicles with manual window crank   page 70
-6 .   - Remove bolt -1-.
   Tightening torque: 1.5 Nm (13 in. lb)
-  Pull handle shell -2- downward out of door trim -4-.
- Remove bolts -3- (2x). 
   Tightening torque: 2.5 Nm (22 in. lb)
    
Note:  
The Bowden cable for the inside door mechanism and the electrical 
harness connectors are not disconnected until after removing door trim -3-
.  - Remove bolts -1- (2x). 
   Tightening torque: 1.5 Nm (13 in. lb)
-  Lift door trim -3- up and out of door shell.
-  To install, bases -4- for detent notches -2- (7x) must be installed.
Pa
ge 3 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
        Page 4 of 22
70-4
 
    
Note:  
When installing make sure that hook -3- faces upward.  -  Pull Bowden cable -1- out of guide -2- and remove.
-  Disconnect electrical harness connectors.
Pa
ge 4 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
        Page 5 of 22
70-5
      
Front door trim insulation, removing and 
installing
 
    
-  Insulation -1- must be inserted into door trim -2- all around.
-  When removing or installing insulation -1-, ensure that insulation is not 
damaged when installing it over retaining tabs or electrical harness 
connectors. 
Pa
ge 5 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
        Page 6 of 22
70-6
      
Front manual window cranks, removing 
and installing
 
    
-  Press in flat side of flat-head screwdriver in direction of arrow -1-.
-  Rotate flat-head screwdriver in direction of arrow -2-.
-  Pull off cover in direction of arrow -3-.
    
- Remove bolt -1-.
   Tightening torque: 2.5 Nm (22 in. lb)
-  Remove manual window crank -2- and base -3-.
Pa
ge 6 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
        Page 7 of 22
70-7
      
Front door manual window crank installation 
position  
    
Illustration shows left manual window crank (right side is mirror of left).  
Installation position shown: window closed  A - Driving direction
Pa
ge 7 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
        Page 8 of 22
70-8
      
Release button, adjusting
 
    
-  When locked, release lever must not project more than dimension -a-.
   Dimension -a-: 0-2 mm countersunk
Pa
ge 8 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
        Page 9 of 22
70-9
      
Driver-side power window switches, 
removing and installing
 
     
-  Remove door trim   page 70
-3 .
     
- Remove insulation   page 70
-5 .
     
-  Remove vapor barrier   page 70
-12
 .
    
-  Use screwdriver to remove retaining tabs -1-.
-  Remove power window switches -2-.
Pa
ge 9 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
        Page 10 of 22
70-10
      
Passenger-side power window switch, 
removing and installing
 
     
-  Remove door trim   page 70
-3 .
     
- Remove insulation   page 70
-5 .
    
-  Use screwdriver to release retaining tabs -1-.
-  Remove power window switches -2-.
Pa
ge 10 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1 
        
        
            
      
   
Trending: window, torque, mirror, door lock, ECU, light, trunk