wiring AUDI A4 2000 B5 / 1.G Climate Control Components In Passenger Compartment Workshop Manual

If 22 C (71 F) is always displayed after
switching on the ignition regardless of the last
setting, check voltage supply to E87 (terminal
30) using wiring diagram.

E87 readout can be switched over from C to
F and vice versa by pressing the "temperature
+" and "recirculating air" buttons
simultaneously.

If E87 remains in operation after switching off
the ignition, test cable connection to E87
connector -D- contact -1- for short circuit to
positive (connection for auxiliary heater
operation) using wiring diagram.
Pa
ge 2 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-137

Notes for installing:

When installing flap motor, ensure that relay
lever -D- is correctly positioned ( illus. A87
-
0161 on page 87
-136
).

Install strap -A- (on bracket for motor) first into mounting -B- (on
heater/air conditioning assembly). After installing, always check DTC memory page 01
-18
.
Testing -V85- page 01
-42
(output DTM).
Electrical test page 01
-115
.
Wiring harness must be installed so that it does not come in contact
with moving components (e.g. motor linkage). If the crank on the motor is positioned so that the lever can not be
hooked in or the motor can not be installed, connect motor to the
wiring harness, switch on ignition and place lever in appropriate
position by activating the button for air distribution on A/C control head
-E87-.
Pa
ge 21 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-139

Temperature regulator flap motor -V68-,
removing and installing (1997 )

Remove complete front section of center console
Repair Manual, Body Interior, Repair Group
70


- Loosen floor outlet from the right instrument
panel support page 87
-134
.

Notes for installing: - Identify and mark electrical connectors at flap motor prior to
disconnecting (to prevent mix up) and remove from motor.
- Remove 3 bolts -A-.
- Remove motor and unhook lever -B- (color: red).
After installing, always check DTC memory page 01
-18
.
When installing flap motor, ensure that relay lever -B- is correctly
positioned. Testing -V68- page 01
-42
(output DTM).
Electrical test page 01
-115
.
Wiring harness must be installed so that it does not come in contact
with moving components (e.g. motor linkage).
Pa
ge 23 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-141

Central air flap motor -V70-, removing
and installing (1997 )

Remove complete front section of center console
Repair Manual, Body Interior, Repair Group
70


- Loosen floor outlet from the right instrument
panel support page 87
-134
.

Notes for installing: - Identify and mark electrical connectors at flap motor prior to
disconnecting (to prevent mix up) and remove from motor.
- Remove 3 bolts -A-.
- Remove motor and unhook lever -B- (color: blue).
After installing, always check DTC memory page 01
-18
.
When installing flap motor, ensure that relay lever -B- is correctly
positioned. Testing -V70- page 01
-42
(output DTM).
Electrical test page 01
-115
.
Wiring harness must be installed so that it does not come in contact
with moving components (e.g. motor linkage).
Pa
ge 25 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-148

Notes for installing:

After installing, always check DTC memory
page 01
-18
.

Testing -V71- page 01
-42
(output DTM).

Electrical test page 01
-115
.

Wiring harness must be installed so that it does
not come in contact with moving components
(Eg.: motor linkage).

Metal lever -A- moves the air flow flap and is inserted in the closed
guide groove -C-. Plastic lever -B- moves the fresh air/recirculating air flap, runs mostly
on the rear of the curved disc and only assumes an open guide
groove position when in "recirculating operation."
Pa
ge 32 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21