reset AUDI A4 2014 B8 / 4.G Getting To Know

Downloaded from www.Manualslib.com manuals search engine You can set any mix of up to 50 Presets from FM, AM or Sirius options. Setting Station Presets1. Press the

function button
multiple times to toggle between FM,

AM or SIRIUS.
TEXT A4SOUND to 38981 Do not text and drive. Message and data rates may apply.
2. Tune to the desired station using the

control knob and pressing to select.
3. Press and hold the center control knob

until the Presets screen shows the

Preset list.
5
RADIO
MMI
® Controls
cont.
To access your Presets:• Press the

function button

then the Presets control button.• Use the MMI® control knob to scroll

through your Presets.• Press the center button of the control

knob to select a Preset.• Using Voice Recognition, press ,after the beep, say “Presets”.
NOTE: Occasionally, tall buildings and tunnels may interrupt the satellite signal. For more information, please refer to the SiriusXM® brochure in your glove box.4. Scroll to the numbered list position

where you want to save your selection.
5. Press the center control knob again; the station is saved to this position.
6
RADIO
MMI® Controls

Downloaded from www.Manualslib.com manuals search engine Voice Recognition: MMI
®
Call By Name

1. Press the

button.

A beep will sound.
2. Say,
“Call”

(e.g., “Call John Smith”).
3. To confirm the request, say
“Yes”
. The number

will be dialed.NOTE: If multiple numbers are stored for a given contact, the system will ask which number you wish to dial. When calling by name using voice recognition, you must say the name as it is stored in your phone book.
TEXT A4VOICE1 to 38981Do not text and drive. Message and data rates may apply.
11
Important Safety Instructions and Warnings which you must read, are listed on the last panel under Voice Recognition.You may also speak natural language commands using the button. Verbal destination commands can be given while in any screen.Your Audi MMI® Navigation system has many Global Voice

Recognition commands available.
This means that you can access

any function or while another function or mode is active.
Natural Language Commands
Commands such as:• Enter Numbe
r • Redial
• Enter Destination • Online Destination• Presets • FM, AM • MediaYou can begin your request from any screen.
Once your requested function is active, you can continue with commands for that mode.For example:• En
ter Number
• Dial• Repeat• CorrectionTo cancel Voice Recognition while active, say “Cancel” after the beep or press the button until system responds with cancelled.Refer to your owner’s manual for further commands.
12
BLUETOOTH®
Pairing