audio AUDI A5 2008 B8 / 1.G Infotainment MMI Operating Manual

Contents3
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Entering the PIN/PUK code . . . . . .
Emergency calls . . . . . . . . . . . . . . .
Dialling a telephone number . . . .
Answering and ignoring telephone
calls . . . . . . . . . . . . . . . . . . . . . . . . . .
Ending calls . . . . . . . . . . . . . . . . . . .
Storing a telephone number in the
directory . . . . . . . . . . . . . . . . . . . . . .
Dialling a stored telephone number
Other settings for the Bluetooth car
telephone kit . . . . . . . . . . . . . . . . . .
Other settings for the phone pre-
installation . . . . . . . . . . . . . . . . . . . .
Navigation. . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . .
Activating navigation mode . . . . .
Entering a destination . . . . . . . . . .
Stopping the route guidance . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . .
Storing a destination . . . . . . . . . . .
Loading a destination . . . . . . . . . .
Other settings . . . . . . . . . . . . . . . . .
Calling up traffic information. .
Introduction . . . . . . . . . . . . . . . . . . .
Calling up traffic reports (TP memo)
Setting a traffic station . . . . . . . . .
Calling up a traffic message . . . . .
Other settings . . . . . . . . . . . . . . . . .
Multi-function steering
wheel
. . . . . . . . . . . . . . . . . . . . . . . .
Basic operation . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . .
Adjusting the volume . . . . . . . . . . .
Listening to the radio . . . . . . . . . . .
Playing media . . . . . . . . . . . . . . . . . .
Television . . . . . . . . . . . . . . . . . . . . . .
Using the telephone . . . . . . . . . . . .
Navigation . . . . . . . . . . . . . . . . . . . . .
Voice control . . . . . . . . . . . . . . . . . . .
Telephone handset. . . . . .
Basic operation . . . . . . . . . . . . . . . .
Switching the handset on and off
Overview of the keypad . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . .
Using the telephone . . . . . . . . . . .
Placing calls . . . . . . . . . . . . . . . . . . .
Speed and one-touch dialling . . . .
Answering and ignoring telephone
calls . . . . . . . . . . . . . . . . . . . . . . . . . .
Emergency calls . . . . . . . . . . . . . . . . Ending calls . . . . . . . . . . . . . . . . . . . .
Options during a call . . . . . . . . . . . .
Answering and replacing further
calls . . . . . . . . . . . . . . . . . . . . . . . . . . .
Menus. . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . .
“Last calls” menu . . . . . . . . . . . . . . .
“Phone book” menu . . . . . . . . . . . . .
“ Text messages” menu . . . . . . . . . .
“Settings” menu (handset) . . . . . . .
Vo i c e c o n t r o l . . . . . . . . . . . . . .
Telephone speech control
system . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . .
Basic operation . . . . . . . . . . . . . . . . .
Name tags . . . . . . . . . . . . . . . . . . . . .
Speech recognition for some
export markets . . . . . . . . . . . . . . . . .
Storing names in the phone book*
Selecting a name from the phone
book* . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a name from the phone
book* . . . . . . . . . . . . . . . . . . . . . . . . . .
Speech dialogue system . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . .
Basic operation . . . . . . . . . . . . . . . . .
Name tags . . . . . . . . . . . . . . . . . . . . .
Listening to the radio . . . . . . . . . . . .
Playing an audio CD . . . . . . . . . . . . .
Using the directory . . . . . . . . . . . . . . 88
89
90
92
92
93
94
94
101
104
104
105
105
110
110
112
114
116
121
121
121
122
122
123127
128
128
129
129
130
131
132
136
137
139
140
140
140
142
145
145
146
147
147148
149
150
151
151
152
153
154
155
159
160
160
161
164
167
167
168
168
169
169
170
172
174
175
175





 




Overview9
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Overview
Controls and displays at a glance
The various controls of the MMI are arranged centrally
and are easily accessible.
Multi-function steering wheel* . . . . . . . . . . . . . . . . . . .
Driver information system . . . . . . . . . . . . . . . . . . . . . . .
MMI display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ON/OFF button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MMI control console . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note
•Please note that only the MMI and its components are described
in this operating manual. For more information about your vehicle's
equipment and features, please refer to your Owner's Manual.
•The arrangement of the MMI switches and controls on right-
hand drive models* may be slightly different from the layout shown
in
page 8, fig. 1. However, the symbols used to identify the
controls are the same.
MMI: Multi Media Interface
The Audi Multi Media Interface (MMI) combines different
communication and entertainment systems in your Audi.
With your MMI you can listen to the radio or CDs, watch television*
and even connect portable players*1). The navigation system*
guides you directly to your destination. You can also follow your
individual route plan with up to three stopovers. Information about traffic conditions is taken into account when calculating your route.
Of course, you can use many your mobile phone's* functions in
conjunction with the MMI. Alternatively, a handset is available for
the integrated Bluetooth car telephone kit*. In addition, the MMI
combines various driver assistance systems of your vehicle.
You can access the comprehensive infotainment system in several
ways. On the one hand, you can reach all functions via the MMI
control console with its intuitive and standardised operation
concept. On the other hand, you can access frequently used MMI
functions via the multi-function steering wheel or the speech
dialogue system.
Notes on traffic safety
You should only perform important functions, e.g. enter a naviga-
tion destination, while the vehicle is stationary. Please always bear
in mind: Be prepared to stop operating the system in the interest of
your safety and that of other road users.
WARNING
•Today's driving conditions require your full attention. As the
driver, you have full responsibility for the safety of the vehicle and
other road users. For this reason, only operate the MMI when the
traffic conditions allow you to do so safely and when you can
maintain proper control of your vehicle - risk of injury.
•The volume of the audio sources (radio, CD player, etc.) should
only be set at a level which enables you to hear distant police and
emergency vehicles clearly - failure to do so could result in an acci-
dent.
•Please heed laws regulating the use of telephones in vehicles.
1)Still under development at the time of printing.
A1128
A2128
A342
A412
A540
A641










Media drives11
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Media drives
General notes on CD/DVD operation
These general notes apply to audio CDs and navigation
DVDs.
Requirements for good sound reproduction
Please note the following in order to ensure perfect high-quality
sound reproduction and avoid damage to media drives:
•Do not use damaged or scratched CDs or DVDs .
•Do not use single CDs (diameter 8 cm / 3 inches) .
•Do not use non-circular CDs (shape CDs) .
•Do not use labels .
•Do not use protective rings .
•Do not use dirty CDs or DVDs.
•Do not use a CD cover or a stabiliser.
•Always store unused CDs/DVDs in a suitable CD case and do not
expose them to direct sunlight.
Cleaning media drives, CDs and DVDs
Never use a CD player cleaning disc to clean the media drives.Clean CDs and DVDs with a soft, lint-free cloth. Wipe the disc in a
straight line from the centre outwards. If necessary, dirt can be
removed with a commercially available CD cleaner or with isopropyl
alcohol. Please never use petrol, paint thinner or record cleaner, as
these can damage CDs and DVDs.
Use of laser equipment
Laser devices are divided into the safety classes 1 to 4, as specified
by DIN IEC 76 (CO) 6/ VDE 0837. The audio devices used on your
vehicle are classified as safety class 1. Lasers used in devices that
fall into this category are very weak and well screened, so there is
no danger if used correctly.
Read errors
If the display indicates a read error, any of the following causes are
possible:
Note
•Under certain circumstances audio CDs that are copy-protected
or CDs that do not comply with the standard audio format cannot be
Fig. 2 CDs that should
not be used.
AA
AB
AC
AD
AE
ProblemRemedy
CD/DVD is dirty.Clean the CD/DVD.
CD/DVD is scratched.Replace the CD/DVD with a
scratch-free CD/DVD.
CD/DVD was inserted upside
down.Insert the CD/DVD with the text
facing upwards.
Condensation has formed on
the CD/DVD.Wait until the CD/DVD is dry.
A mechanical malfunction has
occurred on the media drive.Contact an Audi dealer or quali-
fied workshop.










Media drives 12
played. CDs that comply with the standard audio format have the
label “Compact Disc Digital Audio”.
•At extremely high or low outside temperatures, it is possible that
the playback of a CD/DVD will not function temporarily. A thermostat
switch is installed to protect the CD/DVD and the reading laser.
•Never remove the device cover. The device has no components
that can be serviced by the owner.
CD changer
Introduction
Eject button
CD slot
button
Position buttons with integrated diodes
The CD changer is located in the centre console. You can load
standard audio CDs or MP3/WMA CDs into the CD changer. The MMI
is used for playing CDs
page 63.
MP3/ WMA files must meet the following specifications:In the case of MP3 files with variable bit rate the display of elapsed
playing time may deviate from the actual figure.
Please note that music files are copyright-protected.
Note
•Please observe the notes for handling CDs
page 11.
•The CD changer does not support playlists and DRM-protected
files.
•In view of the variety of CD-Rs and CD-RWs and the difference in
memory capacities, the quality of this function may vary in the case
of some memory media.
Loading CDs
Do not use any force when inserting a CD into the drive. The
CD will be drawn into the slot automatically.
Fig. 3 CD changer
A1
A2
A3LOAD
A4
MP3 filesWMA files
FormatMPEG-1 Layer 2 and 3
MPEG-2 Layer 2 and 3Version 7, 8 and 9
StandardISO 9660 Level 1 and 2
File systemJoliet (single session and multisession)
Bit rates32 to 320 kbit/s and variable bit rate
Number of
files and
directoriesMax. 255 files per directory, max. 255 directories;
in total not more than 512 files and directories
per medium
ID3 tags/
WMA tagsVersion 1, 1.1, 2.2, 2.3
and 2.4,
max. 30 charactersVersion 7, 8 and 9,
max. 30 characters
Supported
mediaCD-ROM, CD-R, CD-RW with a capacity of 650 MB
and 700 MB











Media drives 18
Please note that music files are copyright-protected.
Note
•You can shorten the process of scanning for music files on the
connected USB memory device by creating a central folder for
music files and playlists and positioning it as the first item (alpha-
betically) on the memory device.
•Do not use USB extension cables or adapters as these impair the
functionality.
•The Audi music interface does not support DRM-protected files.
•In view of the variety of USB memory devices and the difference
in memory capacities, the functionality may be restricted in the case
of some memory devices.
•For up-to-date information please see the internet, e.g.
“www.audi.com”.
•An iPod shuffle cannot be used with the USB/mini USB adapter
cable.
Applies to vehicles: with Audi music interface and 3.5 mm jack plug/adapter cable - under
development at the time of printing
Connecting a portable player via an adapter
cable (with 3.5 mm jack plug)
You can connect your portable player (e.g. MP3 player) to
the Audi music interface using the adapter cable with
3.5 mm jack plug.
– Connect the 3.5 mm jack plug to the earphone connec-
tion of your portable player. The audio source is then
played through the sound system of your vehicle.
If the Audi music interface is already selected as the source

page 63, fig. 54, you may hear some brief interference (a noise
often occurring on home stereo systems) when you connect or
disconnect the 3.5 mm jack plug. To avoid this interference, you can
either activate the mute function
page 45 or another audio
source (radio
page 54, CD
page 63) before connecting and
disconnecting the portable player.
Note
We recommend setting the output level of the portable player to
about 70 percent of maximum. You can adjust the volume level (for
instance to match the radio volume) via the Input level function

page 70.
MP3 filesWMA files
FormatMPEG-1, MPEG-2
MPEG-2.5Version 7, 8 and 9
StandardISO 9660 Level 1 and 2
File systemFAT16, FAT32
File namesDisplay of file names may be restricted by MMI
screen.
Bit rates8 to 320 kbit/s and vari-
able bit rate64 to 320 kbit/s and vari-
able bit rate
No. of filesMax. 500 files per directory
(function restricted with more than 500 files)
Structure of
foldersMax. 7 subfolders
PlaylistsMax. 119 playlists, no more than 1000 entries per
playlist
Playlist
formatsM3U, PLS, B4S
ID3 tags/
WMA tagsVersion 1, 1.1, 2.2, 2.3
and 2.4,
max. 30 charactersVersion 7, 8 and 9,
max. 30 characters










Phone pre-installation21
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Applies to vehicles: with phone pre-installation
Inserting and removing a mobile phone
Important: A mobile phone adapter must be installed

page 20.
Inserting
– Place the mobile phone in the adapter
fig. 12.
– Press the mobile phone into the adapter until it locks into
place.
Removing
– Press the release button
fig. 13.– Lift the mobile phone out.
Should you insert the mobile phone into the adapter or remove it
during a call, the audio output or the connection may be inter-
rupted.
WARNING
Always make sure that the mobile phone is properly engaged. In
the event of an accident, a mobile phone which is not securely
fitted could be flung out of the adapter unit and injure the driver
or passengers.
Caution
The mobile phone could possibly be damaged if it is not properly
inserted in the adapter and falls out when driving.
Note
•When you insert the mobile phone in the adapter the connection
is established via the interface in the adapter set; the Bluetooth
connection is then cancelled
2).
•If you use mobile phones in the vehicle this can generate electro-
magnetic fields.
−For this reason, you should always operate mobile phones
with an external aerial. This also applies to mobile phones used
in Bluetooth mode. The external aerial directs the electromag-
netic fields to the exterior, which reduces the field strength in the
vehicle interior.
−If retrofitting an external aerial, please ensure that it is
installed correctly.
Fig. 12 Inserting
mobile phone in
adapter
Fig. 13 Removing
mobile phone from
adapter
AB2)Some adapter sets do not end the Bluetooth connection.











Basic operation 40
Basic operation
All MMI menus at a glance
The menu structure
page 38, fig. 26 and
page 39, fig. 27
contains the available options for each main function of the MMI
system.
Note
Depending on the equipment fitted in your vehicle, the menus may
differ from those shown here.
Switching on and off
Vehicles without advanced key*
– The ignition must be switched on to turn on the MMI
system. The menu of the last main function selected will
appear. The last used audio/video source will automati-
cally be activated.
– To switch off the MMI system, remove the ignition key.
Your settings will be stored.Vehicles with advanced key*
– To switch on the MMI system, press the button.
– To switch off the MMI system, press the button
twice. Your settings will be stored.
Manual mode
– To switch on the MMI system, briefly press the ON/OFF
button
fig. 28.
– To switch off the MMI system, press and hold the ON/OFF
button until the MMI is switched off.
The MMI system will not be switched on automatically when the
ignition is switched on if it was turned off manually the last time it
was operated.
The MMI system remains in operative mode for approximately 10
minutes after the ignition is switched off. If you do not press any
function selector button, control button or the rotary pushbutton on
the MMI control console within this time period, the MMI system
will be switched off automatically.
Note
If the ignition is switched off and the battery charge level is low, the
MMI system will be switched off automatically.Fig. 28 ON/OFF button
START
STOP










Basic operation43
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Speller
Use the speller to enter addresses, a navigation destina-
tion or a telephone number.
Some functions in the directory, telephone* or navigation* mode
require you to enter letters or numbers. In the MMI display the
speller for numbers
fig. 32 or letters
fig. 33 will appear.
While entering the numbers/letters, you can switch from numbers
to letters and vice versa as desired by turning the rotary pushbutton
to 0..9
fig. 33 or A..Z
fig. 32 and then pressing the rotary
pushbutton.
All symbols for entering letters and numbers are explained in the
following table:
TP symbolReception of traffic reports
page 58.
Corners of
display
Indicates the functions that can be
selected.
Use control buttons to select func-
tions. The top right corner of the dis-
play corresponds to the top right
control button.
SubtitlesInforms you of a selected option (e.g.
current radio station).
Function
wheelIs operated by turning and pressing
the rotary pushbutton.
Crossed-out
loudspeaker
symbolCurrent audio source is muted.
Time
Telephone
symbol*Missed calls*
page 91, fig. 85.
LegendSymbol /
MarkingExplanation
A11
A12
A13
A14
A15
A16
A17
Fig. 32 Speller for
numbers: Entering
phone numbers
Fig. 33 Speller for
letters: Finding a direc-
tory entry
A11A5





 




Basic operation45
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Switching the MMI display on and off
Switching off the display
– Starting from any one of the Setup menus, press the
control button for Display.
– Turn the rotary pushbutton to Switch off display

fig. 34 and press the rotary pushbutton. The display
will be switched off.
Switching on the display
– Press or turn the rotary pushbutton, or
– Press a function selector button, or
– Press a control button, or
– Press the button.
Note
After switching off the display, you can still change the station on a
selected audio/video source using the arrow buttons on the MMI
control console.
Adjusting the volume
Current audio/video* source
Adjust the volume or mute the audio sources using the
ON/OFF button.
Increasing and reducing the volume
– Turn the ON/OFF button clockwise or anti-clockwise. The
volume level you select is stored in the memory.
Mute
– Briefly press the ON/OFF button. A crossed-out loud-
speaker will appear in the MMI display.
Unmute
– Briefly press the ON/OFF button, or
– Turn the ON/OFF button.
When you switch on the MMI system, very high/very low volume
levels are automatically reduced/increased to a preset level.
If you activate the mute/pause function by pressing the ON/OFF
button briefly before switching off the MMI, the mute/pause func-
tion will remain active when the MMI is switched on again.
Fig. 34 Switching off
the MMI display
RETURN
Fig. 35 Increasing,
reducing and muting
volume of MMI system










Basic operation 46
If you are in CD mode, the CD playback will be paused while the
mute function is activated.
Note
You can also adjust the volume by scrolling the right thumbwheel
on the multi-function steering wheel up and down without having
to remove your hands from the steering wheel
page 129.
Other audio sources
The volume of the voice guidance*, traffic reports*, the
speech dialogue system* and the telephone* can be
adjusted separately.
The system automatically sends a test message while the
settings are being adjusted.
– Starting from any of the audio, TV*, or SETUP menus,
press the control button for Sound
page 41.
– Turn the rotary pushbutton and select Volume settings.
– Press the rotary pushbutton. The Volume settings menu
will appear on the MMI display
fig. 36.
– Turn the rotary pushbutton to select an item in the menu.– Press the rotary pushbutton. Now you can adjust the
volume for the selected item.
– Turn the rotary pushbutton to select the desired volume.
– Press the rotary pushbutton to confirm your adjustment.
Note
Select Audio during route guid. to adjust the volume of the current
audio source during route guidance (spoken navigation
directions).
Adjusting the sound
Basic settings
Fig. 36 Volume
settings
Fig. 37 Selecting
balance





!