radio AUDI A5 2008 B8 / 1.G RNS_E Navigation System Manual

Navigation (NAV)113
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP map
page 143 and in Setup Navigation
page 151 to d i s p l a y th e
map.
If you are navigating without stopovers, you have the option of
selecting from up to three routes, in addition to detailed route infor-
mation
page 130.
If you are n avigatin g with stopovers, you are shown the entire route
with all stopovers and detailed information in an overview
page 132.
You can also use the map as presented in the Navigation System
display to enter a destination
page 128.
Applies to vehicles: with display of the instrument clusterVisual presentation in the instrument cluster display
A s s o o n a s y o u h a v e e n t e r e d a r o u t e i n t o t h e N a v i g a t i o n S y s t e m a n d
begun navigating, guidance to your destination will also be
displayed in the instrument cluster display.
Fig. 116 Instrument
cluster display:
Example of route guid-
ance presentation
Display
Shor t descriptionEstimated time of arrival at destination or current
stopoverDistance remaining to next turn pointDirectional arrowLocation-dependent display of freeway, highway
and street names
An arrow before the display identifies the name of
the street onto which you should turn.Total kilometers to destination or current stopover
Fig. 117 Instrument
cluster display:
Example of route guid-
ance presentation
(turn off)
A1A2A3A4A5

Navigation (NAV)115
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP A s s o o n as y o u h a v e e n t e r e d a r o u t e i n t o t h e N a v i g a t i o n S y s t e m a n d
begun navigating, guidance to your destination will also be
displayed in the instrument cluster display.
When the turn-off is immediately ahead, the arrow points in the
direction in which you should turn. In addition, the name of the
s t r e e t i s s h o w n u n d e r t h e a r r o w. A b a r g r a p h
page 114, fig.119 on
the right in the display takes you precisely to the turn-off point.If it is necessary to make a lane change before the turn off, you are
warned in plenty of time about this lane change before the turn-off
arrow by a second arrow
page 111, fig.114.
Tips
With active guidance, you can switch to the trip computer display*
by pressing the trip computer reset button*. Pushing the trip
c o mp ut e r re s e t b ut to n * a g a in r e t ur n s y o u to g u i d a n c e . Yo u c a n fin d
detailed information about the trip computer* in the Owner's
Manual.Selecting navigation function
The navigation functions can be selected with the
function button.Fig. 120 Display: Main navigation menu
Display
Short descriptionDistance remaining to next turn pointEstimated time of arrival at destination or current
stopoverDirectional arrowLocation-dependent display of freeway, highway
and street names
An arrow before the display identifies the name of
the street onto which you should turn.Total kilometers to destination or current stopoverChange of direction arrowBar graph (countdown): bars decreasing in size indi-
cate how the distance to the immediate turn-off
point is decreasing; the bar graph is not shown until
a change of direction arrow is displayed.If there is another side street before the turn-off
point which is not part of current guidance, this side
street is represented by a side-street symbol in the
instrument cluster display.
A1AA AA4A9A:A
NAV

Navigation (NAV)117
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP The following submenus are available in navigation
Setup function:
Main navigation menuEntering a navigation destination
Destinations can be easily entered in various ways.Fig. 121 Navigation: Destination entry menu (main menu)First determined whether you would like to navigate to a final desti-
nation with or without stopovers
page 139. After you have
decided on the type of guidance (with/without stopovers), you can
enter a destination over different routes. Entering destination data
in the entry menu
fig.121 is handled in the same way in single
destination and route planning mode.
Navigation submenus
Press the
function button in
the NAV function page 151
Map scheme (day/night)
Orientation
Map type
Map contents
Voice information
Delete previous destinations
Turn list
Highway info
Intersection map
Auto intersection zoom
Compass
Version information
Demo mode
Set position/direction
SETUP

Navigation (NAV)119
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the function button
page 16.
– Press the control button with the Route function.
–Select Route without stopover to switch to single desti-
nation mode
page 119
page 139. The destination
entry menu
page 117, fig.121 appears, or
–Select Route with stopover to switch to route plan

page 121 and then select Destin.. The destination
entry menu
page 117, fig.121 appears.
–Select Region
page 118, fig.122.
–Select another Region from the list
page 118, fig.123
by rotating and pressing the control knob.When selecting a country, destination data (street, city and catego-
ries) that was previously stored in the destination entry menu is
deleted.
Entering single destination (Route without stopover)Fig. 124 Navigation: Entering the destination using the speller–Press the function button
page 16.
– If necessary,Press the control button with the Route fu n c -
tion and confirm the Route without stopover function to
s w i t ch to si n g l e d e st i n at i o n m o de
page 139. Th e de s t i -
nation input menu
page 117, fig.121 appears.
– Select ggf. Region
page 118.
– Select City and enter the name using the speller,

fig.124 or
– In the speller display, select LIST
fig.124 and select
the city from the list.
NAV
NAV

Navigation (NAV)121
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Entering Route plan (Route with stopover)
Up to three stopovers and a final destination can be set
in the Route plan.Fig. 125 Navigation: Route plan– Press the function button
page 16.
– Press the control button with the Route function and
confirm the Route with stopovers function to switch to
Route plan
fig.125.
–Select Destin. to enter the final destination.
–Select Region as applicable
page 118.
–Select City and enter the city using the speller, or
– In the speller display, select LIST and select the city from
the list.– Select Select city center to navigate to the center of the
selected locality, or
– Select Input street name, Special destination in city or
Destination input on map to set more detailed destina-
tion criteria.
– Enter stopovers by means of Add stopover 1, Add
stopover 2 or Add stopover 3.
– Select Start route guidance
page 129.
After you have started route guidance, the calculated route plan
with all the various information is initially shown as an overview on
the map. Confirm route guidance by pressing the control knob. You
can find additional information about the route plan starting on page 132.
Switch from the letter speller to the number speller to enter a city
with special characters (e.g. hyphen, apostrophe or period) page 125.
Selection “Select city center”
The Navigation System calculates route guidance to the center of
the city entered.
Selection “Input street name”
B y i n p u t t i n g t h e s t r e e t i n a c i t y, y o u c a n s p e c i f y t h e d e s t i n a t i o n m o r e
precisely.
After selecting the street, you can set more detailed destination
criteria by entering an Intersection or a Street number
page 128.
NAV

Navigation (NAV)123
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Destination input street
Wi thi n a se le cted reg ion, a stre et c an b e select ed e ve n
without specifying a city.Fig. 126 Navigation: Entering a street as destination using the spellerFig. 127 Navigation: Set more detailed street information
– In a destination input menu
page 117, fig.121, select
another Region
page 118 from the list by rotating and
pressing the control knob or confirm the region already
being shown. This deletes all existing entries in the desti-
nation input menu
page 117, fig.121.
– Select Street
page 117, fig.121 and enter the street
name using the speller, or
– In the speller display, select LIST
fig.126 and select
the street from the list.
– Select a location from the following list.
– Select End entry
fig.127.
– Geben Sie ggf. Enter stopovers for route guidance with
stopovers
page 139.

Navigation (NAV)125
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP Selection “Input street name”
By inputting the street in a city, the destination can be specified
more precisely.
After selecting the street, you can specify more detailed destination
criteria by inputting an Intersection, a House number or through
Enter destination on map
page 128.
If you would like to find a street independently of the city, select
Street after selecting the country in the main navigation menu.
Selection “Special destination in city”
By selecting a special destination in the specified city, tourist attrac-
tions or public facilities (e.g. hospital, movie theater,) can be
selected directly as a destination.
If you would like to find a particular special destination indepen-
dently of the city, select Special destination after selecting the
country in the main navigation menu
page 126.
Selection “Destination input on map”
You can find destinations for a specified city from the map display.
If the map is being displayed to select a destination, the crosshairs
are in the center of the city in question. By moving the crosshairs
horizontally and vertically, you can set a new destination
page 149.
If additional detailed information is available for the selected point
on the map, you can display it using the Detail info function.
You can select the Set as destination function, if you have set the
route guidance with stopovers. If you are navigating without stop-
over, the Set as stopover function is greyed out
page 139.
Yo u c a n a l s o Save to directory
page 135 t h e s e l e c t e d m a p d e s t i n a -
tion By inputting a street, you can predetermine the map location in
greater detail.
Tips
If you have entered a city in the s peller display, you can confirm the
entry for this city by pressing and holding the control knob. Or, you
enter par t o f a city and you a lre ady recognize the d esired city in the
speller display list, you can shift directly to the city list by keeping
pressure on the control knob.Entering street/city with special charactersFig. 130 Navigation: Switch from letter to number speller– In a destination input menu
page 117, fig.121, select
another Region from the list by rotating and pressing the
control knob.

Navigation (NAV)127
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– In a destination input menu
page 117, fig.121, enter
another Region as applicable.
–Select Special destination
page 117, fig.121.
–Select Find entry
page 126, fig.131 and enter the
name using the speller, or
–Select Te l e p h o n e n u m b e r, In immediate vicinity, In
vicinity of destination, Along the route or Regionwide.
– Select a subcategory or enter additional data for the
special destination.
–Select Set as destination. Th e s pe c i a l de s t i n a t i o n i s au to -
matically transferred to the route guidance.
– Geben Sie ggf. Enter stopovers for route guidance with
stopovers
page 139.
–Select Start route guidance
page 129.The special destinations stored on the navigation DVD (e.g. airports,
gas stations, etc.) can be selected.
Using the Find entry, you can input the name of the special destina-
tion with the speller.
When you confirm a selected special destination, it becomes the
new destination.
Selection “Telephone number”
When telephone number for the special destinations are stored on
the navigation DVD, you can enter these special destinations by the
telephone number.Selection “In immediate vicinity”
This special destination
page 126, fig.132 refers to the area
immediately surrounding the current vehicle position.
This function is especially useful for planning stopovers, for
example to find the nearest restaurant.
The list of special destinations displayed is sorted in ascending
order according to distance (as the crow flies) to your location. The
distance displayed for special destinations can differ considerably
from the driving distance.
Selection “In vicinity of destination”
After a destination has been entered in a menu for destination
in put, a s pecial des tina tion ca n be in the vicinity of the destination.
If no destination has been entered in the destination input menu,
this function is greyed out.
This special destination refers to a final destination already calcu-
lated and is useful, for example, when you are looking for a gas
station at your destination.
Selection “Along the route”
This special destination refers to route calculation. Special destina-
tions “Along the route” can only be selected during active route
guidance.
It is particularly suitable for setting a specific special destination
along the calculated route. Only special destinations situated
directly on the route are located.
Selection “Region-wide”
This special destination is not assigned to any city or previously
selected destination. You will receive a list of all possible special
destinations in each country. For example, you can obtain a list of
the possible airports for the specified region.

Navigation (NAV)129
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Confirm by rotating and pressing the control knob the
third map menu item (destination flag)
page 128,
fig.133.
–Select Set as destination
page 128, fig.134.
– Geben Sie ggf. Enter stopovers for route guidance with
stopovers
page 139.
–Select Start route guidance
page 129.If you enter a city in the destination input menu first, before you
press the control button with the Map function, the system jumps
to the center of the city entered on the map display.
Selection “Detail info”
If additional detailed information is available for the selected point
on the map, you can display it by selecting the Detail info function.
If the Detail info function is greyed out, no details are available on
the navigation DVD.
Selection “Set as stopover”
When you have activated Route with stopover, you can also select
the stopovers from the map.
If you have not activated Route with stopover, this function cannot
be selected (greyed out).
Selection “Save to directory”
The selected map position can also be imported into the directory.
You can assign this position to an existing directory entry or open a
new entry. With a new entry, first input a name using the speller.
Then you can input additional data on the entry. If you activate
Display as top destination, this entry is displayed in the destination
input menu
page 117, fig.121
page 133.
Tips


Th e d e s t i n a t i o n e n t r y f r o m t h e m a p i s a l s o a v a i l a b l e t o y o u i n t h e
city submenu and street submenu.


Yo u c a n a l s o s e t a m a p p o i n t w h i c h i s not l o c a t e d o n a s t r e e t ( e .g .
by means of the geo-coordinates) using the crosshairs. In this case,
the system tries to navigate as close as possible to this destination
using digitized streets.
Start route guidanceFig. 135 Navigation: Start route guidance– Enter all the necessary information for route guidance.
You can use the different options that have been
described
page 117.

Navigation (NAV)131
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Press the control knob to start the route guidance
desired.When you select a route by rotating the control knob, you are shown
various information about this route. The information that pertains
to the selected route is highlighted in white.
The following information can be displayed for the individual
routes.
Route guidance includes sections of freeway
Estimated freeway kilometers
Route includes sections of road subject to tolls or sticker
showing the length of the sections
Route includes ferry connection(s)
Route includes roads closed at certain times of day
Route includes seasonally closed roads
Estimated distance to destination
Estimated time of arrival at destination
Destination highlighted on map
Suggested route 1
Suggested route 2
Suggested route 3
Starting point highlighted
Orientation
Scale
When you have entered a single destination and started route guid-
ance, the system switches automatically to route selection display.
The route highlighted after the automatic switch to map display is
the route which was calculated according to the criteria
page 141
that you set. For e x ample, if you set “fast in the “Route criteria”, the
route with the shortest estimated arrival time is highlighted after switching automatically to the map display. You are also offered a
second fastest and a short route as a selection where possible.”
If you do not select any of the routes suggested, the route marked
is automatically imported after a delay once the trip has started or
during the trip. The delay gives you the opportunity to change the
route selection one more time.
Tips
The estimated time for the possible routes depends on the various
route options. As soon as the calculation is complete, these routes
are shown on the map display. In some cases, visual overlaps may
result, in which c ase the route ca n be distinguished vis ually on ly by
the change in the distance given or the estimated time of arrival.
A1AA3A4A5A6A7A8A9A10A11A12A13A14A15