instrument cluster AUDI A5 CABRIOLET 2013 Owners Manual

(!) Door handle
@
®
©
®
®
Power locking sw it ch
Memory buttons (dr iver's seat)
Button for side ass ist
A ir outlets
Control lever for :
- Turn signal and high beam
0 Multi-function steering wheel
with:
- Horn
- Driver's airbag ........... .
- Audio/video , telephone and
navigation buttons
- Rocker switches for tiptronic
operation .... .... ... .... .
@ ISETI button .... ....... .... .
® Instrument cluster ......... .
@ Reset button for trip odometer
@ Switches for:
- Windshield wiper/washer
- Trip computer ............ .
@ Ignition lock ............ .. .
@ Adjustable steer ing column
~ Control leve r for :
- Cruise contro l .. ... ... .... .
- adaptive cruise contro l ... .. .
@ Instrument lighting .. ... ... .
@ Release lever for the engine
hood .. .. .. ............. .. .
@ Data Link Conne ctor for On
Board Diagnos tic s (OBD II) ... .
@ Light switch ........... .. .. .
@ Adjuster control for outside mir-
35
64
103
53
144
90
11
10
12
57
25
75
75
84
94
55
212
29
52
rors . . . . . . . . . . . . . . . . . . . . . . 55
@ Power window switches . . . . . . 39
@ Radio-Displayll or MMI-Display
@ Depending on options:
- Radio system
- CD changer
l) The im age in t he d ispl ay will app ea r either in mu lt ipl e
col ors or in a singl e co lor , de pen din g o n th e vehicl e
e q ui pment. Th e m ulti co lo r im age w ill be use d i n this
O w ner's Manual becau se bo th mult i co lo r and sin gle
col or vers io ns are almost iden tic al.
Instruments and controls 9
@) Emergency flasher ......... .
@ Glove compartment (lockable)
@ Front passenger's airbag .....
@ Depending on options, switches
for :
- drive select .............. .
- Electron ic Stabilization Con -
trol ..... ... .. ..... ..... .
@ Deluxe aut omatic climate con-
tro l ...................... .
@ Selector lever for automatic
transmission ......... ..... .
@ Ashtray with cigarette lighter
@ Depend ing on options:
- MMI cont ro l console or
- drive select ......... ..... .
- Electron ic Stabili zation Con-
trol button .............. .
@ Central power window switch
@ Powe r top switch ........... .
@ I START ENG IN E STOPI button
@ Electromechanical parking
brake .. .. .... ... .. ....... .
(D Tips
54
67
144
107
179
70
88
66 ,66
107
17 9
44
78
80
-Some of the equipment or features
shown in the general illustration may be
standard equipment on your vehicle or
may be optional eq uipment depending
on your model. Always ask your author­
ized Audi dealer if you have a quest ion
about your vehicle.
- Operation of the Multi Media Interface
(MMI) is described in a separate manual.

10 Instruments and warning/indicator lights
Instruments and warning/indicator Lights
Instruments
Instrument cluster and controls
The instrument cluster is your central source of information.
Fig. 3 Overv iew of the inst rument cluster
CD Coolant temperature gauge .. .
@ Tachometer ............... .
@ Warning/indicator lights .. .. .
© IS ETlbutton ............ .. . .
® Display
- Driver information system .. .
- Time and date d isplay .. .. .. .
- Odometer ............. .. .
@ Reset button for trip odometer
(z) Speedometer
@ Fuel gauge . ......... .. .. .. .
@ Tips
10
11
13
11
24
12
12
12
12
- When switching the ignition on, the nee­
dles in the instrument cluster swing up­
ward briefly.
- The illumination for the instrument clus­
ter lights up whenever you switch on the
i gnition with the
vehicle headlights off .
As the daylight fades, the instrument
cluster illumination likewise dims auto­
matically a nd will go out completely
when the outside light is
very low. This
feature is meant to remind you to switch
on the headlights when outside light
conditions become poor.
Engine coolant temperature gauge
The engine coolant gauge c> fig. 3 CD only
works when the ignition is on. To prevent
damage to your engine, please note the fol­
lowing important points:
Engine cold
If the needle is at or close to the bottom of
the gauge, the engine has not yet reached its
operating temperature. Avoid high engine
speeds, heavy engine loads, and heavy throt ­
tle app lications.
Normal temperature
When the engine has reached its operating
temperature, the needle will
move to the mid­
dle of the gauge and remain there . If the en­
gine is working hard at high outs ide tempera­
tures, the needle may
move higher on the
gauge. This is not a cause for concern as long
as the . warning light in the instrument
cluster display does not illuminate. If the.
warning light in the instrument cluster dis­
play flashes, this can mean one of two things:
either the coolant
temperature is too high, or
the coolant
level is too low c> page 18 Ill-

Instrument s and warning /indicator lights 11
/! WARNING
- Always observe the warning in
¢ page 205, Engine compartment, be­
fore opening the hood and checking the
engine coolant level.
- Never open the engine hood if you see or
hear steam, or if you see engine coolant
dripping from the engine compartment.
You could burn yourself . Let the engine
cool off first so that you cannot hear or
see any steam or engine coolant .
(D Note
-Mounting additional lights or accessories
in front of the air inlets reduces the cool­
i ng effect of the radiator . At h igh outside
temperatures or high engine load, the
engine could overheat.
- The front spo iler has been designed to
properly distribute the cooling air when
the veh icle is moving. If the spoiler is
damaged, this could reduce the cooling
effect and the engine could then over­
heat. Ask your authorized Audi dealer for
assistance.
Tachometer (engine rev counter)
The tachometer indicates the engin e RPM
(revolutions per minutes).
If engine RPM d rops be low 1,500 , you should
downshift to the next lower gear. The red area
at the end of the scale indicates maximum
permissible engine RPM after the break-in pe­
riod . Before reaching this area, move these­
lector lever to position D/S or ease your foot
off the accelerator pedal.
(D Note
The tachometer needle@¢ fig. 3 should
only briefly be in the red zone: you cou ld
damage your engine! The beginning of the
red zone varies depending on the engine.
@) For the sake of the environment
Upshifting early saves fuel and reduces en­
gine noise.
~ button
You can perform different functions with this
button .
Fig. 4 SET but ton in th e in str ume nt cluster
The !SE T! button performs the following func­
tions:
Switching on time, date , temperature
display, and odometer
The display appears for approximately 30 sec­
onds when you press the
!SE Ti button ¢ fig. 4
with the ignition off.
Starting the Auto -Check sequence
The Auto-Check system constantly monitors
certain ind iv idual functions and components
of the vehicle when the ign ition is turned on
and when the vehicle is moving .
With the ignition turned on, you can start the " Auto-Check sequence" by pressing the
!S ET i
button. You can perform an Auto-Check se­
quence when the vehicle is stationary and the
ignition is turned on or when the vehicle is
moving slower than 3 mph (5 km/h) .
In addition, the number of keys initial ised fo r
your vehicle is displayed.
L2 3/3 means that
three keys have been initialised. This feature
enables used car buyers to make sure they
have received all of the keys.
If you are given only two keys, for instance,
you should take the vehicle and the existing keys to an Audi dealer to have the missing key
disabled.
It is also important to notify your in -
surance company about the loss .
IJJ,-

12 Instrum ents a nd warning /indic ato r li ghts
Se tting th e speed warning
By pressing the I SETI button br iefly, you can
set threshold 1 of the speed warning while
you are driving
¢page 83. By maintaining
pressure on the
ISETI button, you delete the
warn ing threshold.
Digital clock with date display and
Odometer
Fig. S Instrument cl uster: odo meter
Fig. 6 Instrument cl uster: reset button
Digital cl ock /GPS controll ed cl ock *
Depending on the vehicle equipment level,
you may choose between the quartz clock or
the
GPS controlled clock* l!'j in the radio or in
the MMI*. You can learn more about this in
the MMI manual or in the radio user's manual.
Odometer /trip odom eter
The display of distance driven is shown in kilo ­
meters "km" or in miles "mi".
- USA mode ls - Miles
- Canada models -Kilometers
The units of measure (kilometers/miles) can
be changed in the radio or MMI*. You can
learn more about this in the MMI manual or in
the rad io user's manual. T
he odometer @ shows the total number of
kilometers or m iles that have been driven on
the vehicle .
The trip odometer @shows the d istance driv­
en since it was last reset. It can be used to
measure short distances. The last digit shows
distances of
100 meters or 1/10 of a mile.
The trip odometer can be reset to zero by
pressing the reset button
1 0.01 ¢ fig. 6.
Ma lfunct ion message
If there is a malfunct ion somewhere in the in­
strument cluster,
DEF w ill appea r in the trip
odometer and wil l stay on . Co ntact your au­
thorized Aud i dea ler to have the problem cor­
rected.
Immob ilizer
When the ignition is sw itched on, the data on
the ignit ion key are scanned automat ica lly.
If an unauthor ized key was used,
SAF E is dis­
played permanently in the odomete r display
field . The vehicle cannot be operated
¢page 32.
(j) Tips
-When you switch off the ignition or open
the driver door, the t ime, date, odome­
t er and temperature are displayed for an
add itiona l
30 seconds.
- You can also call up the display with the
!SET ! button ¢page 11 wh ile the igni­
tion is switched off.
Fuel gauge
The fuel gauge works only when the ignition is
on .
When the needle reaches the red area, the
warning light
Ii] in the instrument cluster will
illuminate
<:!> page 21. Tim e to refuel!
The tota l tank capacity of your vehicle is listed
in
I::!> page 267. .,.

Instrument s and warnin g/indic ator ligh ts 13
(D Note
Never run the tank completely dry! An ir­
reg ular supply of fuel can cause eng ine
m isfiring and fuel could enter into the ex­
haust system. The catalyt ic converter
could the n overheat and be damaged .
Warning/indicator
Lights
Description
The indicator lights in the instrument cluster
blink or turn on . They indicate functions or
malfunct ions ¢,&. .
Messages may appear with some indicator
lights. A warning signal will sound at the
same time . The messages disappear again af­
ter a short t ime . To display a message again ,
pressthelSE T!button
¢ page 11. If severa l
malfunc tions occu r, each of the indica to r/
warn ing lamps will be d isplayed in succession
for abo ut two seconds at a time .
Some ind icators lights in the disp lay can turn
on in several colors.
_& WARNING
- F ailure to heed warning lights and o ther
impor tant vehicle info rmation may result
in serious persona l injury o r vehicle dam­
age.
- Whenever sta lled or stopped for repair,
move the vehicle a safe distance off the
road, stop the engine, and turn on the
eme rgency flasher¢
page 54.
-The e ngine compartment of any motor
vehicle is a potentially hazardous area.
Before you check anything in the engine
compartment, stop the engine and let it
cool down. Always exercise extreme cau­
t ion when wor king under the hood
¢ page 205, Engine compartment
(D Tips
Ma lfunctions or faults w ill be identified ei­
ther with a red symbo l (pr io rity 1 -Dan- ger!) or with a yellow symbol (prio
rit y 2 -
Warning).
' Overview
Some indicator lights t urn on briefly to check
the function of that system when you switch
the ignit ion on . These systems are marked
with a../ in the fo llow ing tables . If one of
these indicator lights does not tu rn on, there
i s a ma lf u nct ion in that system.
Red indicator lights
Red symbo ls indicate a prior ity ma lfunction -
Danger!
- Pull off the road .
- Stop the vehicle.
- Tur n off the engi ne.
- Check t he malfunc tioning system. Contac t
your author ized A udi dealer or a q ualified
workshop for assistance.
USA models :
Brake system../
¢page 15
----~r~
Canada models:
Brake system ../
¢page 15
USA mod els :
Elec tromech anical parki ng br ake
¢ page 16
Canada models:
Electromechanical parking brake
¢page 16
Safety be lts
¢ page 17
Electromechanical steering ../
¢page 183
Battery
¢page 17
Engine oil pressure
¢page 17
Eng ine oil level
¢page 17

Instrument s and warnin g/indic ator ligh ts 19
I START ENGINE STOPI button because the en ­
gine cannot be started again after the ignition has been switched off.
(D Tips
The symbol's appea rance might be differ­
ent in some models .
;';.![J Electronic Stabilization Control
(ESC)
If the JjJ indicator lamp blinks while driving,
the ESC or ASR (Ant i-S lip Regulation) is active­
l y regulating.
If the
JjJ indicator lamp illuminates, the sys­
tem has switched the ESC off. In this case, you
can switch the ignition off and then on to
sw itch the ESC on again. The system is func­
tioning completely whe n the indicator lamp
sw itches off.
If the I i ndicator lamp illuminates, the ESC
was switched off with the
I ~ OFF ! button.
Stabilization cont rol (E SC/A BS): Fault! See
owner 's manu al
If the indicator light G1 and the ABS indicator
light
E (USA models) ; (IJ (Canada mod­
els) turn on and the message appears, there is
a ma lfunction in the ABS system or e lectronic
d ifferent ial lock . This also interrupts the ESC.
The brakes still function with their normal power, but ABS is no t active.
Drive to your authorized Aud i dea ler immedi ­
ately to have the malfunct ion corrected.
For more informat ion about the ESC
¢page 179.
ABS /(8 ) Anti-lock braking system (ABS)
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL).
The warning/indicator light E (USA mod ­
e ls)/ [§] (Canada models) wi ll come on for a
few seconds when the ignition is switched on.
The light will go out after an automatic check
sequence is completed .
There is a malfunction in the ABS when:
- The warning/indicato r ligh t does not illum i­
nate w hen you switch the ignition on.
- The warning/indicator l igh t does not go out
after a few seconds .
- The warning/indicato r light i llum ina tes
while driving.
The ESC i ndicator light also illuminates if
there is a ma lfunction in the ABS. The mes­
sage
Stabi liz ation control (ESC ): Fault! See
o wn er's manual
also appea rs in the ins tru­
ment cluster d isp lay and a warning tone
sounds.
Th e brak e sys te m will still re spond even
without the a ssista nce of the AB S system.
S ee y our autho riz ed Audi de aler a s soon as
po ssible to re store full braking perf ormance.
For more information regard ing the ABS
¢ page 179.
Malfunction in th e brake system
If the brake war ning ligh t ¢page 15 and the
ABS warning illum inate
together there may be
a malfunction in the ABS , and there may a lso
be a malfunction in the brake system itself
¢ A . The ABS will not work and you w ill no ­
ti ce a change in b raking response and per ­
formanc e.
In the event of a malfunction in the brake
s y stem
the warning/indicator light 11111
(USA models)/ . (Canada models) in the in­
strument cluster flashes¢
page 15.
Malfunction in th e electronic diff erential
lock (EDL)
The EDL works together w ith the ABS. The
ABS warning light will come on if there is a malfunction in the EDL system ¢
page 179.
See your author ized Audi dealer as soon as
poss ible.
&, WARNING
- I f the E (USA mode ls)/ ti] (Canada
models) warning light does not go ou t,
or if it comes on whi le driving, the ABS
-

Instruments and warning/indicator lights 21
o Malfunction Indicator Lamp (MIL)
The Malfunction Ind icator Lamp (M IL) is part
of the On-Board Diagnostic (OBD II) system.
The symbol
¢'4 lights up when the ignition is
switched on and wi ll turn off after the engine
has started and has sett led at a constant idle
speed. This ind icates that the MIL is working
properly .
The warning light illuminates when there is a
malfunction in the engine e lectronic system .
Contact your author ized Audi dealer and have
the ma lfunction corrected .
An improperly closed fue l fi ller cap may also
cause the MIL light to illuminate ¢
page 210.
For more informat ion ¢ page 29.
!?) Engine speed limitation
Applies to vehicles: wit h en gin e speed l im it at ion
(II Do not exceed max. engine speed of
XXXX rpm
The Ill symbo l illuminates when there is an
engine control malfunction . Th e~ indicator
light in the instrument cluster also illumi­
nates. The engine speed is limited to the
speed displayed in the driver information sys­
tem. Keep in mind that the eng ine speed will
not exceed the value displayed in the driver in­
formation system, for example when down­
shifting.
Drive to your authorized Aud i dea ler immedi­
ately to have the malfunction corrected.
~ . Engine oil level
II Add oil, max XXXX l. You may cont. driv.
When the symbo l II and driver message ap­
pear, add the amount of o il appearing i n the
d isplay at the next opportunity¢
page 217.
Ill Oil level! Sensor defective
If the symbol illuminates, contact your au­
thorized Audi dealer and have the o il sensor inspected.
Until you have this done, check the
oi l level each time you refue l just to be on the
safe sid e¢
page 217 .
Bu Tank system
flm Please refuel
If the indicator light turns on for the first
time and the message appears, there are
about 2.1 -2.4 gallons (7 -9 liters) of fuel left
in the tank . T ime to refuel ¢
page 209.
Ii] Fuel tank system malfunction! Contact
dealer
If the indicator light turns on and this mes­
sage appears, there is a malfunction in the
tank system.
Drive to your authorized Audi dealer immed i­
ate ly to have the malfunction corrected.
(-.) .>Lease refill washer fluid
If the symbol illuminates, add w indshie ld
washe r fluid to the washer system and also to
the headlight washer system * ¢
page 226.
~ Windshield wipers
£!I Windshield wiper defective
The re is a malfunction with the windshie ld
wipe rs.
Drive to your authorized Audi dealer immedi­
ately to have the malfunction corrected .
~/ }0 10 $ Defective light bulb warning
If the
l':;:'1 indicator light turns on, a bulb has
failed. The message indicates the location of
the bu lb.
- If the
II indicato r light also turns on, then
a fog light has failed. The position of the in­
dicator light corresponds with the location
on the vehicle .
- If the
[tD indicator light also turns on, then
a rear fog* light has failed. The position of ..,_

Trip computer
Introduction
The trip computer gives you information on
current and average fuel mileage, average
speed, fuel range and driving time .
Fig. 9 Trip computer display: Average fuel mileag e
The fo llowing information is continuously
eva luated by the trip computer and can be dis­
p layed sequentially in the instrument cluster
display:
Fuel range
The estimated cruising range in miles (km)
appears in the display. This tells you how far
your vehicle wi ll be able to travel on the cur­
rent tank of fue l and with the same driving
style. The display changes in increments of 6
miles (10 km).
The cruising range is calcu lated based on the
fuel cons umption for the last 18 mi les
(30 km) . If you drive conservatively, the cruis­
ing range will increase.
Average fuel mileage
The average fuel economy in MPG (l/100 km)
since you last cleared the memory appears in
this display. You can use this disp lay to adjust
your driving technique to achieve a desired
mileage .
Current fuel mileage
The instantaneous fuel consumption in miles
per gallon (l/100 km) is shown in this display .
You can use this display to adj ust yo ur driving
technique to ach ieve a desired mileage.
Driver information display 25
Fuel consumption is recalcu lated at intervals
of 33 yards (30 meters). This display switches
to gallons/hour (liters/hour) when the veh icle
is not moving.
Average speed
The average speed in mph (km/h) s ince you
last reset the memory appears in the display.
Elapsed time
The length of time that yo u have been driving
s ince you last reset the memory appears in
th is disp lay.
Distance
The distance that has been covered since the
last time the memory was cleared appears in
the d isplay .
(0 Tips
- Fuel consumptions (average and cur­
rent), range and speed are displayed in
metric units on Canadian mode ls.
- All stored values will be lost if the vehi­
cle battery is disconnected.
Memories
The trip computer is equipped with two fully
automatic memories as well as an efficiency
program* .
Fig . 10 Tri p computer display: memory leve l 1
You can switch between the trip computer 1
and 2 and the efficiency program* by pressing
the
I RESET I button @r:::> fig. 11 .
You can tell which memory leve l is currently
active by the number o r the sign in the display
II--

The values in the single-t rip or the total-trip
memory can a ll be reset to zero at the same
time under
Reset in the menu .
I n addition, you can determine what informa­
tion from the trip computer should be shown
in the instrument cluster display. If one of the
p ieces of driver information is turned
Off , that
driver information w ill not be shown in the
display. The information will continue to be
calculated by the trip computer and can be
turned back
On at any t ime.
(D Tips
- This function is not avai lab le on all
vehicles.
- The driving information in the efficiency
program is also reset to zero with the
s ingle-trip memory.
Efficiency program
Description
Applies to vehicles: with trip compu ter with effic iency
program
F ig. 12 Display : efficiency program
... Press the !RESET I button @c::> fig. 11 re­
peatedly until the efficiency program ap­
pears in the display .
The eff iciency program can help you to use
less fuel. It evaluates driving information in
reference to fuel consumption and shows oth­
er equipment influencing consumption as well
as shift recommendations . Fue l economy
messages c::>
page 2 7 provide tips for effi­
cient driv ing.
The eff ic iency program uses d istance and con­
sumption data from trip computer
1. If the
Driver information display 2 7
data are deleted in the efficiency program,
those values are also reset in trip computer
1.
Other equipment
Applies to vehicles: with trip computer with efficiency
program
Fig. 13 Display: othe r equ ipment
.,. In the efficiency program, press the func­
tion selection switch
c::> fig . 11 @ repeatedly
until the other equipment appears in the
disp lay.
Other equipment th at is currently affecti ng
fuel consumptio n is listed in the efficiency
program. The display shows up to three othe r
items of equipm ent@. T he equ ipme nt using
the most fuel is lis ted first .
If more than three
items using fuel are switched on, the equip ­
ment that is currently using the most fuel is
displayed.
A scale @also shows the current total con­
sumption of all other equipment .
Fuel economy messages
Applies to vehicles: with trip compute r with efficiency
program
Fig. 14 Display : fu el econo my message

@ Tips
-Do not reset the display between oil
changes, otherwise the display will be in­
correct.
- The information in the Service Reminder
remains stored even when the vehicle
battery is disconnected.
On-Board Diagnostic
system (OBD)
Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL)¢• in
the instrument cluster is part of the On-Board
Diagnostic (OBD II) system .
The warning/indicator light illuminates when
the ignition is switched on and goes out after
the engine starts and the idle has stabilized.
This indicates that the MIL is work ing proper­
ly.
If the light does not go out after the engine
is started, or illuminates while you are driv­
ing, a ma lfunction may ex ist in the engine sys­
tem. If the light illuminates, the catalytic con­
verter could be damaged.
Continue driving
with reduced power (avoid­
ing sustained high speeds and/or rapid acce l­
erat ions) and have the condition corrected.
Contact your author ized Audi dealer .
If the lig ht illuminates, the electronic speed
limiter may also be malfunctioning. For more
information
~ page 29, Electronic speed
limiter .
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
~page 210.
Driver information display 29
On-Board Diagnostics
Fig. 1 6 Locat io n of Data Li nk Co nnector (DLC)
On-Board D iagnostics monitors the compo­
nents of your em ission contro l system. Each
monitored component in your engine system
has been ass igned a code. In case of a mal­
funct ion, the component will be identified
and the fault stored as a code in the control
module memo ry.
The MIL light may also illuminate if there is a
l eak in the on-board fuel vapor recovery sys­
tem. If the light illuminates after a refueling,
stop the vehicle and make sure the fuel filler
cap is properly closed ~page 210.
In order to make an accurate diagnosis, the
stored data can only be disp layed using spe­
cial diagnostic equipment (generic scan tool
for OBD).
In order to connect the specia l diagnostic
equipment, p ush the plug into the Data Link
Connector (DL C). The DLC is located to the
rig ht of the hood release
~ fig. 16.
Your authorized Audi dealer or qualified work­
shop can interpret the code and perform the
necessary repair.
A WARNING
Do not use the diagnostic connector for
personal use . Incorrect usage can cause
malfunctions , whic h can increase the risk
of a collision!
Electronic speed limiter
Your vehicle may be factory equ ipped with
-
tires that are rated for a maximum speed of .,..