relay AUDI A5 COUPE 2010 Owners Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2010, Model line: A5 COUPE, Model: AUDI A5 COUPE 2010Pages: 360, PDF Size: 84.39 MB
Page 250 of 360

-Traile r  t ow ing 
----- -=---------------------------------
Tr a ii er  towing 
Driving  with  a  trailer 
General  information 
Your Audi  was  designed  primarily  for  passenger  transpor
tation. 
If you  plan  to  tow  a trailer,  please  remember  that  the  additional  load 
wi ll  affect  durability , economy  and  performance. 
Trai ler towing  not  on ly p laces  more  stress  on the  vehicle,  it a lso ca lls 
for  more  concentration  from  the  driver. 
For this  reason,  always  fol low the  operating  and  driving  instructions 
provided  and  use  common  sense. • 
Technical  requirements 
Traile r  hit ch 
Use a weight -carrying  hitch  conforming  to  the  gross  trailer  weight. 
The  hitch  must  be suitab le for  your  vehicle  and  tra iler  and  must  be 
mounted  secure ly on  the  vehicle's  chassis  at  a 
technically  sound 
location . Use only  a trailer  hitch  with  a  removable  ball  mount. 
Always  check  with  the  trai ler  hitch  manufacturer  to  make  sure  that 
you  are  using  the  correct  hitch. 
D o not  u se a  b umper  hit ch . 
The  hitch  must  be  installed  in  such  a way  that  it  does  not  interfere 
w ith  the  impact-absorbing  bumper  system .  No  modifications 
should  be  made  to  the  vehicle  exhaust  and  brake  systems . From 
time  to  time,  check  that  all  hitch  mount ing  bolts  remain  securely 
fastened. 
When  you  are  not  towing  a trailer,  remove  the  trailer  hitch  ball 
mount.  This  prevents  the  hitch  from  causing  damage  should  your 
vehic le be  struck  from  behind  =:> & . 
Tra iler  br akes 
If  your  trailer  is equipped  with  a  braking  system,  check to be  sure 
that  it  conforms  to  al l regu lations. 
T he trailer  hydraulic  brake  system  must  not  be directly  connected  to 
the  vehicle's  hydraulic  brake  system=:>& . 
Safet y  cha ins 
Always  use  safety  chai ns  between  y our  vehicle  and  the  trailer . 
Traile r  lights 
Trai ler  lights  mus t meet  all  regulations.  Be su re to  check  with  your 
authori zed Audi  dealer  for  correct  wiring,  switches,  and  relays . 
Mirrors 
If  you  are  unable  to  see the  traffic  behind  you  using  the  regu lar 
outside  mirrors,  then  you 
must instal l extended  m irrors.  It  is  impor 
tant  that  you 
always have  to  the  rear . 
& WARNING 
• If  a trailer  ha s el ectri cal  brake s please  note  that  the se  brak es 
are  n ot  act iva ted  by the  fa ctory -fitted  control  unit  · ri sk  of acc i
dent ! 
•  After  remo ving the  tr ailer  hit ch ,  d o n ot store  it  in  yo ur  vehi cle. 
In ca se of  sudden  b raking , th e hitch  could  fly  forw ard  and  injure 
you  or your  p assengers . • 
Operating  instructions 
M ax imum  tr aile r  w eight 
A trai ler for  your  vehicle  is  limited  to  a typica l class  1 or  class  2 
trai ler.  
Page 329 of 360

________________________________________________ E_ m ___ e_r.::g ~e ___  n_c ~y:.- s;_ i_t _u :...:a:..:. t.:.: i...:o :...:n...:..:. s _ __,J_ 
& WARNING  !continued) 
• Before you check anything  in the  engine  compartment,  always 
read  and  heed  all WARNINGS~  page 263, "Engine  compartment". 
0 Note 
• Applying  a higher  voltage  booster  battery  will  cause  expensive 
damage  to  sensitive  electronic  components,  such  as control  units, 
relays,  radio,  etc . 
•  There  must  be  no  electrical  contact  between the  vehicles  as 
otherwise  current  could  already  start  to  flow as soon  as the  positive 
(+) terminals  are  connected. 
[ i) Tips 
•  The  discharged  battery  must  be  properly  connected  to  the 
vehicle's  electrical  system.  When  jump  starting  or charging  the 
battery , never  connect  the  negative  ground  cable  to  the  battery 
negative  post  because  the  battery  manager  system  must be able  to 
detect  the  battery's  state  of  charge.  Always  connect  the  negative 
ground  cable  to the  negative  ground  post  of  the  battery  manager 
control  unit .• 
Use  of  jumper  cables 
Make  sure  to connect  the jumper cable  clamps  in exactly 
the  order  described  below! 
Fig. 251  Engine 
compartment : Connec· 
tors  for  jumper  cables 
and  charger 
Fig. 252  Jump  starting 
with  the  battery  of 
another  vehicle: @ 
discharged  vehicle 
battery, 
© booster 
battery 
The  procedure  described  below  for  connecting jumper 
cables  is intended  to provide  a jump  start  for  your vehicle. 
Vehicle  with  discharged  battery: 
Turn  off  lights  and  accessories,  move  lever  of  automatic 
transmission  to 
N (Neutral)  or P (Park) and  set  parking 
brake. 
~ 
Vehicle  care  Do-it-yourself  service  irechnical data